Trip Posted July 16, 2015 Report Posted July 16, 2015 ==>A 1/2" in a single pass - that's big! To get one edge on rough stock, it's done all the time -- for edges, not really a big deal -- on a face, that would kind of scare me... It's one reason a jointer normally has a wider diameter head than a planer... I suppose it depends on the stock you work with... If you normally process S3S, well I suppose 1/2"+ would be unusual... But when you process rough sawn, so you need to take a decent swipe to make something flat. Quote
Brendon_t Posted July 16, 2015 Author Report Posted July 16, 2015 Well Brendon it sounds like you are officially out of excuses for not starting on your Roubo No way, now I can blame my blades. . I can keep this up forever. Quote
Chet Posted July 16, 2015 Report Posted July 16, 2015 No way, now I can blame my blades. . I can keep this up forever. Yea but do you want to? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.