collinb Posted September 14, 2015 Report Posted September 14, 2015 Use a feather board on the saw. Never a thumb or finger. It isn't very bad but I am a slow learner it seems. Sent from my MotoE2(4G-LTE) using Tapatalk Feeling like the poster child for something, I don't know what. Quote
shaneymack Posted September 14, 2015 Report Posted September 14, 2015 Collin you gotta be careful man! What did you do?? You still have the whole digit? Stitches? Hope you recover quick and are back to woodworking asap. Quote
collinb Posted September 15, 2015 Author Report Posted September 15, 2015 I was cutting a shim. Had just cut two others. On the third it hit something in the wood and kicked it back. Sent from my MotoE2(4G-LTE) using Tapatalk Quote
collinb Posted September 15, 2015 Author Report Posted September 15, 2015 Yes I have the whole digit. Just end damage. I'm thinking film photography will be a safer hobby in the future. Sent from my MotoE2(4G-LTE) using Tapatalk Quote
wtnhighlander Posted September 15, 2015 Report Posted September 15, 2015 Glad you didn't lose anything too important! At least you can take solace in the fact that your mishap will help someone else work safer, at least fir a while! 1 Quote
Trip Posted September 15, 2015 Report Posted September 15, 2015 ==> I'm thinking film photography will be a safer hobby in the futureAccept for all those nasty chemicals...Or if you're the type of moron who takes selfies with bears, rattlesnakes or at the edges of cliffs... 2 Quote
collinb Posted September 15, 2015 Author Report Posted September 15, 2015 Glad you didn't lose anything too important! At least you can take solace in the fact that your mishap will help someone else work safer, at least fir a while! "Mishaps" Cannot forget the router. And yes that is the reason for the post. Sent from my MotoE2(4G-LTE) using Tapatalk Quote
andrew-in-austin Posted September 15, 2015 Report Posted September 15, 2015 Hope you have a speedy recovery. Do you have a Grr-ripper? If not, I highly recommend it. Makes the table saw significantly safer to use. Quote
collinb Posted September 15, 2015 Author Report Posted September 15, 2015 (edited) Hope you have a speedy recovery. Do you have a Grr-ripper? If not, I highly recommend it. Makes the table saw significantly safer to use.I'll look into one. Tx.btw, I do use a push stick, and not just a stick. This happened with my had on the outside of the wood and away from the blade. But still too close. Edited September 15, 2015 by collinb Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.