Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Is brushless really that big of a deal?

Featured Replies

As the title pretty much states: isbrushless really that big of a deal in drills and impacts? Is it really worth the extra money?

-Jon

My son in law does tool repair for a construction supply company and the simple answer he gave me a few weeks back when was shopping for the same two tools is that because you don't have brushes rubbing against the motor creating drag you get more power from the same size battery and the battery last longer per charge.

I would imagine that if you worked the trades this can be a big deal in the course of as day, but to the average individual not so much.  Having said that I got the brushless.  I found a good deal on the Milwaukee through CPO.

I read a test report somewhere, maybe FWW, that showed it to not be that great a difference. Brushless is a little more compact.

Most of mine are brush type but I have 1 that is brushless. In everyday use I don't really notice a difference.

What Chet said...His son inlaw is spot on. One other small benefit he didn't mention is a bit more torque with brushless. It's vaguely noticable when using a large wood feeder bit. The difference is really minimal and in a blind test you would barely see much difference overall. 

Both of the current sets of drill/drivers we use the most were bought before they started selling the brushless ones, or at least in stores when I needed another set.  I can't tell you how many hundred pounds of star drive (TORX) screws we've driven with them, but I'm sure it's over three hundred pounds-just bought three five pound boxes of 3-1/2's Friday.  I've never had to replace any brushes either.  Currently running at least five year old Makita LXT's the most, and have not had to replace a battery.  The batteries charge faster than we can run one down.

I guess if you drive more screws than we do, it might be worth the extra money for brushless.  I'm most loyal to best deal when I need tools.

When I was buying am 18v Circ. Saw I was reading and watching reviews. I remember one of the tests they got considerably more cut time from the brushless compared to the old brushed. That was enough to sway my purchase. I think it was maybe a $40-50 difference I don't remember anymore. 

1 hour ago, kbj said:

When I was buying am 18v Circ. Saw I was reading and watching reviews. I remember one of the tests they got considerably more cut time from the brushless compared to the old brushed. That was enough to sway my purchase. I think it was maybe a $40-50 difference I don't remember anymore. 

You definitely get more run time comparitively speaking and a circular saw uses a lot more juice making the brushless more attractive. For a drill that will likely be used mostly for small pilot holes and driving screws it really doesn't offer much of an upgrade. Especially since most drills come with 2 batteries and charge so quickly. I own one of each...they both sit on my bench and I grab them randomly....I couldn't for the life of me tell you which one is brushless unless I looked at the sticker. They both die when they die.

5 hours ago, Janello said:

You definitely get more run time comparitively speaking and a circular saw uses a lot more juice making the brushless more attractive. For a drill that will likely be used mostly for small pilot holes and driving screws it really doesn't offer much of an upgrade. Especially since most drills come with 2 batteries and charge so quickly. I own one of each...they both sit on my bench and I grab them randomly....I couldn't for the life of me tell you which one is brushless unless I looked at the sticker. They both die when they die.

Agreed. Also to that point, if you're mostly drilling small pilot holes and driving associated screws than a small 12v is pretty handy. That's why i like my M12 stuff.   I grab the M18 Fuel stuff when I'm driving lags, boring holes, etc. More construction oriented stuff.

 There is also a pretty decent bump in torque for the brushless 1/2" impact. So going to grab that for working on the truck. Obviously not woodworking related, but another example of when brushless seems to really help out.  

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.