sheperd80 Posted February 28, 2016 Report Posted February 28, 2016 I guess the only issue i see here (aside feom the horrible ink) is that it looks like hes feeding with both hands. Because of the narrow waste piece, his left hand should be planted on the saw, not moving with the board. Sent from my SAMSUNG-SM-G890A using Tapatalk Quote
wdwerker Posted February 28, 2016 Report Posted February 28, 2016 If I am ripping multiple strips from a board I use the Grripper to avoid that little titt. For a single strip I use a push stick if the piece is narrow. The strip he is ripping is borderline for fingers only. Fingers on the off cut is way to dangerous that close to the blade. I'm ripping about 500 - 1.03125" strips that are only 7" long. With the Grripper adjusted I get into a rhythm and flick the part (after cutting) down the outfeed table then set back up to cut the next strip. I stop every 15 or 20 strips to stack them and prevent the repetitive cuts from making me careless. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.