Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Delta 36-5052 or Jet 708493K table saw?

Featured Replies

Hello, all. I'm going to be buying a table saw in the upcoming months. I've got a lot of projects on the list, and they pretty much require me to get a 52" table saw. But, I don't have mountains of money to throw at this and it may be a while before I can start making things to sell, so I'm trying to maintain a modest budget. I want to try to stay as close to $1,000 as I can. And I also need it to be 120v. So, as far as I can tell, that leaves me two options:

Delta 36-5052
http://www.homedepot.com/p/Delta-15-Amp-10-in-Left-Tilt-Contractor-Saw-with-52-in-Right-Hand-Rip-36-5052/205404771

Jet 708493K
http://www.homedepot.com/p/JET-10-in-15-Amp-Professional-Table-Saw-with-52-in-Fence-System-708493K/203699644

 

The Delta is $300 less and has a built-in mobile base, which is appreciated. If I get the Jet, not only is it $300 more expensive, but I also have to invest in another $100 in a mobile base for it.

So the question is, is the Jet that much better? If the quality is really vastly superior to the Delta, then I can justify going a bit further north of my budget. But, if it's only marginally better, I'd rather save the money, if possible.

Does anyone have any input on these two saws or brands, by any chance? Or can you suggest another similarly-priced saw I may have overlooked? Remember, 52", 120v, near $1,000.

Thanks, all!

Why do you need or believe you need a 52" rip capacity?  With that said, I would take a look at the offerings from grizzly.  You could get a decent cabinet or hybrid saw for the same if not better price than the 2 options you linked.  

IMO Grizzly offers more bang for the buck than either the Jet or the Delta.  You'll get a full enclosure, beefy fence, solid cast wings.  Since it's a left tilt saw, you can always slide the front rail farther to the right to gain some rip capacity.  As  Woodenskye said....do you really need 52" rip?

With that said, if you end up spending near $1400, I'd urge to find a way to wire for 240v and get the Grizzly G1023RL....lifetime saw, much more substantial saw for about the same price as a good hybrid saw.  You can slide the rails for that too for more capacity.

Re:the Jet vs the Delta - I do like the mechanisms and CS support of the Jet better.  It's hard to say if it's $300-$400 better.  

The 36-5052 doesn't seem like $400 more saw than the 36-725, which is a solid bang for the buck at $550 from Lowes.  Basically you get a 36-725 with a longer single piece fence rail and a slightly larger motor.  You can always add a solid front rail yourself to a 36-725 and slide it right for more capacity....or even add a whole Delta T3 fence for $183 from HD, then sell the stock fence for $75-$100.  Total cash outlay would be < $700 for a 36-725 with a better fence rail and more capacity.   You could just get a 36-5000 and slide the rails to the right on that too, but at $900 the value still isn't there IMO.  Just my 2 cents....

 

 

 

Good questions on the need for a 52" fence.  I have one by the way so that's where I'm coming from.  Do you plan to be handling a lot of sheet goods?  What are the projects?

On my previous hybrid saw I found that 30" of rip was almost never enough.  As knotscott points out, I slid the front tube over and got 40" of rip which was almost always enough.

Since you mention a mobile base you will not be building a large support structure around the saw to handle the material (assuming sheet goods).  This makes either saw seem lightweight for a kitchen and bath cabinet attack.

Again my previous C-man 22124 hybrid always did whatever I asked of it but, that was one of those saw designs where everything just kind of came together.  It always trounced the competition during that era and so is not a fair comparison to other 120v saws I see today.

AS stated, if I were going $1400 I would look at a Grizzly 1023; decades of happy owners.  They also offer an enclosed cabinet hybrid (G0715 and its variants) that folks seem to like.  The trouble with tablesaw threads is that so many different people have so many different favorites.  The two you're looking at just don't happen to be two of mine ;-)

+1 For Knotscott's suggestions. I bought a 36" Powermatic and just built my own extension wing instead of using the provided one and added some size on it. I didn't have room to go to 52" but it gave me more top space.

Look at the Grizzly, they ship directly to you and if your worried about quality know that a few members have had to deal with customer service and had excellent experiences. One thing i didn't like about the 36-725 was that it wasn't nearly as stable as i was hoping. Too much weight on an extension wing and it started to tip.

  • Author

Thanks, everybody, for all the input! Well, I don't necessarily need the full 52" rip capacity, but the common 30" isn't enough. Something like 36"-40" would be perfect, but I haven't found any that fit my budget.

If I was going to buy a 30" saw, I'd go with the Grizzly G0715P:
http://www.grizzly.com/products/10-Hybrid-Table-Saw-with-Riving-Knife-Polar-Bear-Series/G0715P?utm_campaign=zPage&utm_medium=link&utm_source=direct

Does anyone happen know how easy it is to add some extra rip capacity to this saw? I know some people have taken the rails on their Grizzly saws and moved them over one bolt location to add another six or seven inches to the rip capacity. So, if it's easy to turn this 30" saw into a 36", I could probably deal with that.

Also, regarding 240v, I'm renting my house, so I don't have the authority to wire for 240v.

You'd be further ahead cutting down the bigger rail. I love the 0715, but it was a cost settle. If I spend more it won't be to move to bigger rip. That negates the cost savings. If I spend more I will just move to a true cabinet saw. The 0715 is best if that is the max you want to spend and your entire hobby life can make due with the hybrid carriage. Just my .02. 

2 hours ago, Dave Trendymiddlename Starr said:

Thanks, everybody, for all the input! Well, I don't necessarily need the full 52" rip capacity, but the common 30" isn't enough. Something like 36"-40" would be perfect, but I haven't found any that fit my budget.

If I was going to buy a 30" saw, I'd go with the Grizzly G0715P:
http://www.grizzly.com/products/10-Hybrid-Table-Saw-with-Riving-Knife-Polar-Bear-Series/G0715P?utm_campaign=zPage&utm_medium=link&utm_source=direct

Does anyone happen know how easy it is to add some extra rip capacity to this saw? I know some people have taken the rails on their Grizzly saws and moved them over one bolt location to add another six or seven inches to the rip capacity. So, if it's easy to turn this 30" saw into a 36", I could probably deal with that.

Also, regarding 240v, I'm renting my house, so I don't have the authority to wire for 240v.

Here's a video of a guy who moved his G0715P fence over during initial setup.  He did it a little different than my shows, but it seemed to work.  You'll probably have to or want to fill in the space between the front and back rail on the right side with an extension table.  And you'll need to relocate the tape measure.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.