Pwk5017 Posted June 14, 2016 Report Posted June 14, 2016 Has anyone burned through a pad's velcro? A week ago my pad ceased to grip my sanding discs. I had discs flying all over the shop. I made do with double-stick tape for the last week, and had to order a new pad. $50 for the pad seems pricey, but the tool is useless without it so... In the downtime, I wondered how long i should get out of the pad? It was a used tool, so maybe the previous owner did something to it? Looks like storing the sander without a disc on it can damage the pad's velcro. I am guilty of that. Also, excessive sanding pressure can wear them out quickly. I might be guilty of that? Not sure what is excessive. Most of all, I attempted to use my 5" bosch(absolutely bulletproof velcro pad that festool could learn from) and after 5 minutes I was disgusted by it's performance and went with the double-sided tape idea. I knew the tape would more than likely ruin the pad, but in a pinch it works very well. You dont know what you got till it's gone. My eye started to wander over towards mirka's offerings, and their sanders look awesome. Something to think about in the future if i ever want to ditch the 150/5 Quote
wdwerker Posted June 14, 2016 Report Posted June 14, 2016 Too much suction will pull the sander down to the surface too hard. The increased friction/heat will prematurely wear out the Velcro pad. Before I got my CT-26 I used a row of holes around the hose fitting on my Fein vac to reduce the suction. Quote
rodger. Posted June 14, 2016 Report Posted June 14, 2016 I bought the "hard pad " for the ets 150. Was hard to remove, but was pretty straight forward. Quote
Pwk5017 Posted June 14, 2016 Author Report Posted June 14, 2016 1 hour ago, wdwerker said: Too much suction will pull the sander down to the surface too hard. The increased friction/heat will prematurely wear out the Velcro pad. Before I got my CT-26 I used a row of holes around the hose fitting on my Fein vac to reduce the suction. Damn, that might have been it. I only bought the CT26 a month or two ago. For the last year ive been using a normal shopvac with an adapter. The middle of the pad was worn away and the outer edges were in better shape. I need to make sure to turn the suction down when using the sander! I often switch between the router and sander, which leads to suction adjustment laziness. I only use festool paper, but mirka's holeless abrasive mesh discs look amazing. Can you tell that i am smitten by that company's sanding lineup? Quote
Barron Posted June 14, 2016 Report Posted June 14, 2016 My understanding is I should only use enough pressure to control the sander and just enough suction to capture the dust. On my dust extractor it really does not take a lot of suction. Quote
wdwerker Posted June 16, 2016 Report Posted June 16, 2016 I found out after going into shock over the replacement pad cost. My Festool rep inspected my set up and the pad. He did mention that drilling a ring of 3/8" holes in the hose fitting might reduce the suction enough. I used that set up for at least 5 years before I got the CT26. I've been getting about 2 1/2 to 3 years out of a pad vs 6-8 months before the reduction of suction. Keep in mind my sander gets used daily in my small pro custom shop. Quote
Pwk5017 Posted June 16, 2016 Author Report Posted June 16, 2016 1 hour ago, wdwerker said: I found out after going into shock over the replacement pad cost. My Festool rep inspected my set up and the pad. He did mention that drilling a ring of 3/8" holes in the hose fitting might reduce the suction enough. I used that set up for at least 5 years before I got the CT26. I've been getting about 2 1/2 to 3 years out of a pad vs 6-8 months before the reduction of suction. Keep in mind my sander gets used daily in my small pro custom shop. Yep, that's it then. I don't use my sander as much as you, but I make about one kitchen island a week, which equals more sanding than the average joe. Makes sense that I hit 12-15 months when you were getting 6-8. What at suction do you run at? 50% give or take? Quote
wdwerker Posted June 16, 2016 Report Posted June 16, 2016 The minimum possible for my ETS150/3. I turn it up to max for my tracksaw or router. Quote
pkinneb Posted June 16, 2016 Report Posted June 16, 2016 Good to know 5 minutes ago, wdwerker said: The minimum possible for my ETS150/3. I turn it up to max for my tracksaw or router. Quote
Pwk5017 Posted June 16, 2016 Author Report Posted June 16, 2016 it collects all the dust at minimum suction? Doesn't help my cause that I have hundreds of 6" festool sanding discs with the old 5-6 hole pattern instead of the new 12+ hope pattern. Quote
shaneymack Posted June 16, 2016 Report Posted June 16, 2016 it collects all the dust at minimum suction? Doesn't help my cause that I have hundreds of 6" festool sanding discs with the old 5-6 hole pattern instead of the new 12+ hope pattern. My ct26 is minimum suction when I sand as well. Sent from my SM-N910W8 using Tapatalk Quote
wdwerker Posted June 16, 2016 Report Posted June 16, 2016 I used up all my 5 hole discs and slowly replaced them with the new ones . I still have some 5 hole 50 & 100 grit rubrin that's one of those grits I only need on occasion. Quote
rodger. Posted June 16, 2016 Report Posted June 16, 2016 20 hours ago, shaneymack said: My ct26 is minimum suction when I sand as well. Sent from my SM-N910W8 using Tapatalk +2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.