Recommended Posts

Posted

I would do it differently next time. My problem is that the house we built in '99 has a stairwell to accomodate the basement exit door. Not much sunlight get down the stairs. I have been pressure washing it since the first year about twice a year. I also found a 'wet location' exterior fan on the inter web a few years back. It is powered with a programmable switch and comes on twice a day for about an hour at a time. It does help, but I still have to pressure wash the stairwell at least once a year sometimes more. The fan helps with the airflow, but is there anyone with a similar situation who has any ideas to keep the moisture build up to a minimum. Is there an outdoor dehumidifier?

Posted

Yeah it's kind of like the curse of the north-facing wall.  No matter what, it's gonna gather mold and mildew.

Sorry man, I'm drawing a blank on solutions for that one.

  • Like 1
Posted

If the pressure washer doesn't have the bleach attachment, get a hose end sprayer, spray it down with bleach with the mixture amount set to the maximum, then pressure wash it if it needs it.  Once you kill all the mold and mildew, use the hose end sprayer more often than once a year to stay ahead of it with bleach.  You might try just leaving the bleach on it if there is no paint, or only hosing it down with a regular water hose.

The big multi-story 1828 house on my website faces exactly dead, due North.  We have to pressure wash the front of that about once a year.  When I say pressure wash, I mean we use the pressure washer, but there is never much pressure put on it.

My pressure washer is a pro unit, 4.4gpm at 2500 psi, but it has five different nozzles that produce a different width fan.  The thing that pulls bleach, or soap, or whatever into the stream only works with the widest nozzle, which is pretty wide open.  Really the pressure is just used to shoot a lot of water/mix out.  I have a couple of telescopic wands, and the longer one will reach up to 30', but takes a strong man to hold it.

With bleach, you have to start at the bottom and go up.  Otherwise, streaks can dry lower down before you get to it, and leave a permanent stain.

TSP mixed with the bleach helps to break dirt, and thick mildew off.

I don't know what the differences are in different bleaches, but I've never found anything to work better than plain, regular Clorox.

  • Like 1
Posted

Tom, Thanks for the reply. I tried the Chlorox with a garden sprayer this time before the pressure washer, but I had let it go too long. Almost needed a putty knife. Yesterday I got out the pressure washer and did the stairwell and some of the garden masonry as well. I'm going to try to cut the interval down and try to use bleach bad some TSP.

5 hours ago, K Cooper said:

Rex, don't understand why you keep pressure washing it?

Which part isn't clear?

5 hours ago, Tom King said:

Does your pressure washer have the attachment that allows it to pull bleach through it?

I can add up to 4 additives to the machine.

Posted

To make sure you kill all the mildew roots, you may even have to go with a stronger solution of bleach than the hose end sprayer produces.  For some things, I use a pump sprayer with bleach and water 1:1.   I've done old houses with that, even between the floor joists. 

One house smelled so strong to start with that no person would want to stay in it for very long.  Now you can go in there, take a deep breath, and the air is fresher than a new house today, and there is absolutely no old house smell in the 200 year old house.  I had to cut access holes between the joists, pulled strings to pull a sled with a long hose attached to a pump sprayer, and the trigger taped open.  We could hit one joist space, and then had to leave for the day.  The fumes are toxic.

  This time, after you get it down to bare concrete with the pressure washer, hit it with the strong solution, maybe even several times not letting it dry, and then rinse it.

After that, the hose end sprayer three or four times a year might take care of it.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 36 Guests (See full list)

  • Forum Statistics

    32k
    Total Topics
    437.5k
    Total Posts
  • Member Statistics

    26,007
    Total Members
    3,644
    Most Online
    FurniCore
    Newest Member
    FurniCore
    Joined