Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

damaged oil base top coat, cleaning?

Featured Replies

i have a small cherry end table with a high build of water lox gloss finish that has been mistreated for a few years. it appears to have partial pieces of candy wrapper coating embedded in it the ink part of the wrapper for color seams to be left in the finish after some waited to long to clean them up and the sun may have baked it in..  any suggestions on how to rejuvenate the finish?  thinner and super fine pad? thanks in advance for any tips.

  • Author

thanks for the short answer, never saw one of those. was thinking a more subtle approach might be warranted. but i do have some 100 grit.:)

I've not used waterlox, but you could try using its solvent before resorting to sandpaper.  I know it works with shellac and lacquer.  Worst case scenario it doesn't work and you sand it off anyway. 

A solvent probably won't be much help with Waterlox, but if I was going to try something it would be "Howard's Restor A Finish " . I have seen it at Lowe's.

  • Author

thanks guys

7 hours ago, Gilgaron said:

I've not used waterlox, but you could try using its solvent before resorting to sandpaper.  I know it works with shellac and lacquer.  Worst case scenario it doesn't work and you sand it off anyway. 

 

7 hours ago, wdwerker said:

A solvent probably won't be much help with Waterlox, but if I was going to try something it would be "Howard's Restor A Finish " . I have seen it at Lowe's.

i havnt used water lox in a long time, so humor me here a bit wdwerker, must be after it hardens it is like a conversion varnish?

It's a type of oil/varnish mixture. It cures & hardens. Howard's slightly dissolves the surface layer so you might be able to get the ink from the wrapper out.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.