Recommended Posts

Posted

I need to do something about my ceramic guides. They have fallen out several times and ruined a couple of blades, likely user error on the blade dulling but i keep getting a lot of wobble. I'm not certain it's the guides or the tires, or both, so I'm going to replace both.

I was planning to use Carter Tires and Bearings but I can't seem to find Carter bearings for the Laguna 14-12. Does anyone know which guides fit the 14-12? Carter's website doesn't specifically list the 14-12 on any of their 3 guides for the Laguna saws.

Thanks!

Posted

The Laguna ceramics are great. I don't see why yours are falling out, unless you have the blade rubbing them while running. There should be a small gap of about .002 between the blade and the guide. Easily set with a feeler gauge. Sounds like machine setup issues

Sent from my Nexus 6P using Tapatalk

Posted

Something is amiss here...I have a laguna 1412 and 16HD both with ceramic guides and I have never had an issue like that nor can I even picture a problem like that. I would call Laguna and make sure something is not defective. That would stink to pay $1000 for a bandsaw and have to change the guides.

Posted

@N00b-in-training, I would not throw money at the problem since it is unclear what it is.  Defects can exist; I point to my less than stellar performance on my Forrest saw blade when others could not praise it enough.  The blade was defective.

What has Laguna tech support said about the issue?  I would follow their guidelines before throwing in the towel on a format of guides that many people change to, not from.  I am a die-hard roller guide guy but, the Laguna guides are supposed to be very nice when used and operating properly.

Posted

I've used the saw for about a 18 months, all of the guides came out in the first month. Talked to Laguna and got them glued back in. One comes out about once a month and when it does it causes me all kinds of issues. Dulls blades, etc. The blade has hit the guides when this happens but not on a regular basis. 

Posted

My neighbor had this same issue with his 1412, while I have not. He replaced the tire and installed a new set of the guides, as per Laguna recommendations. I don't think he's had an issue since. I'd contact Laguna again and see what's going on -- they should fix it. 

Posted
21 hours ago, N00b-in-training said:

I've used the saw for about a 18 months, all of the guides came out in the first month. Talked to Laguna and got them glued back in. One comes out about once a month and when it does it causes me all kinds of issues. Dulls blades, etc. The blade has hit the guides when this happens but not on a regular basis. 

Be sure that the guides are placed behind the teeth and gullet on the flat of the blade so the teeth can't grab the guides. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   3 Members, 0 Anonymous, 68 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined