-MattK- Posted January 7, 2017 Report Share Posted January 7, 2017 I was going to write a note directly to @Mike. about his wardrobe build, but maybe others can benefit or want to chime in... I'm building a cabinet with frame and panels and it's nearly time to pre-finish the panels. Do you go through a full finishing schedule on those panels or just a single coat to make sure there's no naked wood that sticks out with wood shrinkage? It's a sapele cabinet, panels are 33 1/8 and 17 1/8 wide. Real hardwood panels, not veneered plywood. thanks for any advice!! Matt Quote Link to comment Share on other sites More sharing options...
davewyo Posted January 7, 2017 Report Share Posted January 7, 2017 I just do a coat or two so that naked wood won't show. Quote Link to comment Share on other sites More sharing options...
treeslayer Posted January 7, 2017 Report Share Posted January 7, 2017 yep, a couple coats of shellac is all i do to pre-finish. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.