Popular Post difalkner Posted March 3, 2017 Popular Post Report Posted March 3, 2017 (edited) This isn't a project yet but will have to be at some point. In my last batch of Walnut last week I found a few nuggets and culled them for special projects yet to come but they were too pretty not to share here. There were three of them and I resawed the lesser of the group to get my settings right, put some Naphtha on to get a good look, and set them aside. Today I needed the big bandsaw for something else so I cut the other two pieces while the fence was still set. Here are the three pieces before cutting - And the lesser of the three, the one on the left, cut and bookmatched - These are the two pieces I cut today, no Naphtha and straight off the bandsaw - I'm not sure what I'll build with these - end table, serving trays, small coffee table, wall art - just not sure yet. The two larger pieces will make a panel about 16" x 28" and the smaller one about 16" x 24". The pieces are about 0.200" thick now and will finish out after sanding somewhere around 0.165" - 0.175". Enjoy! David Edited March 3, 2017 by difalkner Correct typo 6 Quote
Dknapp34 Posted March 4, 2017 Report Posted March 4, 2017 Nice looking stuff! Would make cool panels for a frame and panel door. Sent from my iPad using Tapatalk Pro 1 Quote
Popular Post wdwerker Posted March 4, 2017 Popular Post Report Posted March 4, 2017 Nice crotch ! Never thought I would say that to anyone but my current lady. 5 Quote
Ronn W Posted March 4, 2017 Report Posted March 4, 2017 I got a yard near me that sells kind of lower quality lumber and I see a lot of knots and grain like that in their boards. Thanks for the idea that I could make so interesting veneer or panels. 1 Quote
Popular Post wdwerker Posted March 4, 2017 Popular Post Report Posted March 4, 2017 If it's dry, if it's flat, if it's sound (no huge cracks or loose knots), if it doesn't warp,cup or twist after you resaw it....... beautiful grain is usually right next to a nightmare. Tread carefully, try something very affordable first and practice. I'm not trying to discourage you just slow you down and try to prevent a disaster. 3 Quote
Coop Posted March 4, 2017 Report Posted March 4, 2017 4 hours ago, wdwerker said: Nice crotch ! Never thought I would say that to anyone but my current lady. You've been hanging out here way too long for any of us to believe that! Nice try at covering your tracks though! 2 Quote
difalkner Posted March 4, 2017 Author Report Posted March 4, 2017 11 hours ago, wdwerker said: If it's dry, if it's flat, if it's sound (no huge cracks or loose knots), if it doesn't warp,cup or twist after you resaw it....... beautiful grain is usually right next to a nightmare. Tread carefully, try something very affordable first and practice. I'm not trying to discourage you just slow you down and try to prevent a disaster. That is absolutely correct, Steve! After I cut these I put them in my drying room for a few weeks minimum to let them react how they want to react now that new surfaces are exposed and moisture is being released from those surfaces. They usually cup overnight and slowly go back to somewhat flatter but they get close enough to flat that they'll be ok. Trying to use them in the first few days after cutting would be a nightmare! I usually run these through the drum sander right off the bandsaw because they're still flat and sand easily. After they've been cut and started cupping it's harder to sand unless you wait 3-4 weeks or so, sometimes longer. But they're thin enough to flex easily even if there's still some cupping, you just have to go easy. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.