Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Finishing Canary Wood

Featured Replies

Does anyone have experience finishing canary wood?

On a recent trip to Ecuador my 7 year old son found this small oil painting that for whatever reason resonated with him. After we left the artist's studio I doubled back and bought it for him as a birthday present. I wanted him to have a frame for it made of a wood that grows in Ecuador, so I researched a bit and landed on Canary Wood. I've now made the basic frame, but need to finish it. It has such a beautiful grain pattern that I thought a clear coat would likely be the bast approach. I don't have a sprayer or really any finishing tools beyond a good brush, some rags, and sand paper. My plan of attack was:

  • A seal coat of blonde shellac brushed on
  • Light sanding
  • Several coats of a water based poly, again brushed on with light sanding between coats

Any thoughts as to alternatives?

If it's a smaller item and not used as a surface, why use water-based poly? Shellac or Lacquer alone should be enough protection, and they are both easy to apply.

 

I've used lacquer on a frame I made with canary wood, looked good and was easy. I wouldn't recommend just using water based poly without something to warm up the wood, because I found that didn't bring out the yellow and purple in it.

 

 

  • Author

The above approach is mostly suggested because it is a finishing approach that I - as a fairly novice woodworker - have some experience with, and it has worked pretty well in the past on a few projects.

This should not be subject to lots of abuse, so I don't need an ultra durable finish. My main desire to to let the natural colors of the wood shine.

Seems like lacquer or a wipe on poly are better options then what I suggested. A few of questions.

  • Does either product require - or benefit from - specific prep (like a seal coat)?
  • On the lacquer side, any suggestions on a good wipe on or brush on product?
  • One comment mentioned "warming up the wood", is that needed in a lacquer or wipe on poly? If so, how might that be done?
  • Any other tips on application? This will me my first time with either approach.

Regardless of approach I land on, I will run through the full process with a test board so I can "learn" on something that can be easily discarded.

Thanks for the advice.

I use Deft spray lacquer on small projects. It's pretty much foolproof, just make sure you never spray without the can moving. I'll throw on 4-5 coats for things like tea boxes, and then sand smooth with 320 or 400grit paper before the final coat. Lacquer layers blend together, no need to sand between layers.

I don't see any need for a seal coat or a pore-filler, but I don't care about pores showing through the finish. I haven't worked with Canarywood specifically.

The lacquer I've used warms the wood up slightly, but it's not really imparting any color. Water-based poly's can often add a blue-tint, which reads as "cooler". Lacquer should give you the same color you'll see if you spray the wood with water for a preview. I've only seen/used water-based poly on flooring though, so the nicer furniture-grade products may differ.

I'm with Steve here. On picture frames, I use rattle can shellacin a few light coats, light scuff up before final spray and dry. Fast and very easy

  • 5 weeks later...
  • Author

Just wanted to do a quick follow up to report on my results. I ended up trying  bunch of different options on test boards I actually tried every combination of the following:

  • Base coat
    • Blonde Shellac
    • Garnett Shellac
    • Nothing
  • Top Coats
    • Arm-r-seal (satin)
    • Watco spray lacquer (satin)
    • Just the shellac

As a bonus I did test boards of the canary wood and some walnut (for a night stand project I will be finishing soon). So there were 8 test boards for each species! Probably a little overkill, but I had never used any of these finishes other than blonde shellac, so it was fun to try them all out. I also made my own shellac from flakes, which I had never done before.

The finalists came down to:

  • Blonde shellac alone
  • Satin finish over blonde shellac (honestly the difference between spray lacquer and arm-r-seal was tough to see in this application)

I liked the slightly glossier look of the shellac alone, while my wife preferred the flatter look of the satin finish. We put the deciding vote to my 7 year old son and he sided with Mom :). So the final finish ended up being a coat of blonde shellac and a light sanding, followed by 4 coats of Watco spray lacquer.

I was happy with the end result.

You'll note my miters are not perfect, but the walnut dowels used to stabilize things for glue up ended up looking great when finished. 

Thanks for all of the advice. It was a fun finishing project. Onto the next one.

590625eead2ea_SlackforiOSUpload(2).thumb.jpg.5e2eb7fe0551d8827b2b51dd5c2efa47.jpg

 

590625f3954c3_SlackforiOSUpload(1).thumb.jpg.11bae44507dd631c543e39957afb6c22.jpg

 

 

 

Very nice! I have never worked or for that matter seen canary wood but I really like it. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.