Andrew1 Posted April 14, 2017 Report Posted April 14, 2017 My dad gave me his probably 40 year old Craftsman jointer, the one you see all over craigslist. He used it just a handful of times because he could never get it working right and gave up for alternative methods. He did put a gouge in the knives though so first thing I did was order a new set, after cleaning the rust of course. Come to find out after thinking I was a moron for buying the wrong knives Craftsman had the knives sized so they fit somewhere between 1/8 and 1/16 above the out feed table at the lowest setting (table isn't adjustable just the knives). This was even the case on the knives that came with the saw, and were still on the saw. Silly Craftsman...I mean whoever made this for Craftsman. Well some grinding and fighting with 40 year old seized and rusted metal later it's a working jointer for the first time. Quote
wdwerker Posted April 14, 2017 Report Posted April 14, 2017 I had one of those jointers too. All kinds of tools and hardware is made slightly different so that you couldn't use generic parts. They were tough to adjust ! That's why I got rid of it. Quote
Coop Posted April 14, 2017 Report Posted April 14, 2017 Hand me downs, especially from dad, are memorable, usually at best. The fact that you are able to use it with success is fantastic. I have an old Craftsman tablesaw and planer combo that was my dad's. He used it to add 50% to our old house, and how, I don't know. It's taking up space but I don't dare get rid of it. Good on ya dude! Quote
Andrew1 Posted April 14, 2017 Author Report Posted April 14, 2017 My first table saw was a replica of his minus all the upgrades. I was afraid to use it. Utter junk. Put a good hole in a box after some kickback because the fence was never straight. Some winners some losers. Quote
BonPacific Posted April 14, 2017 Report Posted April 14, 2017 There's something special about hand-me-down tools, like the special place they occupy on the shelf gathering dust. I'm mostly joking. I have an old 6" Delta jointer that my grandfather purchased originally. I ended up harvesting the motor off it to power my lathe, as I could never get the darn thing to cut well. Now the matching Delta drill press, that is a thing of beauty, and runs like a song. Quote
Unknown craftsman Posted April 14, 2017 Report Posted April 14, 2017 Those Craftsman jointers with the fixed outfeed are the worst.They should call it the time thief. Who ever designed it was a baffoon. Quote
Andrew1 Posted April 14, 2017 Author Report Posted April 14, 2017 Working fine so far. They just put in the wrong size knives. Easy update to the owners manual is all. It's a 40 year old machine though. I have been in historic battleships about the same age and it was created without today's computer precision. Is what it is I accept that. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.