Tom King Posted May 5, 2017 Report Posted May 5, 2017 and even that works out. With time to kill this morning, I checked CL. I can always use another drill press. Sounds like it works fine, and the damage is to the sheet metal. I can live with that. I did tell him that I would pay him double what he's asking. https://richmond.craigslist.org/tls/6118025651.html Quote
Eric. Posted May 5, 2017 Report Posted May 5, 2017 I guess you guys are getting the weather system we just experienced this week. Major flooding in south St. Louis County...again. Lots of rain. Quote
Jfitz Posted May 5, 2017 Report Posted May 5, 2017 I think a lot of that is moving this way too. Looks like the weekend will be a washout. Nice find on the DP. with a little elbow grease it looks like it could be a real gem! Quote
Pwk5017 Posted May 5, 2017 Report Posted May 5, 2017 Cant tell what model it is from the photos. Looks like it has an enclosed base? Either way, id love to get my hands on a 1200. My 60s delta/rockwell press was the same price. Great quality drill presses from yesteryear can be cheap cheap cheap. Quote
Tom King Posted May 5, 2017 Author Report Posted May 5, 2017 It's an 1150 with Reeves drive. That thing sitting on the base around the post is the hood. The hood is what has damage, and "doesn't fit the rest of it." Quote
Tom King Posted May 5, 2017 Author Report Posted May 5, 2017 He took the ad down because it's spoken for. He owned it for a long time, and it hasn't seen much use. He's moving, and has to get rid of "a lot of stuff". It's a green with white racing stripe Powermatic 1150 variable speed. The ad didn't say what it was-just listed as "drill press", but showed a couple of pictures. I knew what it was. The ad went up a little less than 2 hours before I saw it early this morning. The ad said it had some damage, and showed a couple of pictures. 50 bucks. I emailed, and he answered right away. The damage is some dents on the sheet metal hood. I told him that if he would hold it for me, that I would pay him double what he was asking. My friend is coming down 95 for the weekend, and picking it up for me, so I don't even have to go get it. My 1150 is not a variable speed model. It's not that bad to change belts, but I'll put that one in the metal shop to replace an aggravating cheap one, and use the variable speed one in the wood shop. I love the 1150's, as do a lot of other people. The depth stop alone is worth the price. It's very easy to use, and absolutely won't budge even after some hundreds of repetitions. I checked ebay, and they're still going for 900 and above. 2 Quote
Tom King Posted May 8, 2017 Author Report Posted May 8, 2017 It works great. The only thing wrong with the sheet metal was that it was squeezed together too tightly side to side to fit over the back of the head. Something happened to it more than someone sitting on it because it has very strong gussets holding its shape. A low profile hydraulic jack, and a couple of blocks of wood fixed it right up. No extra holes drilled in the table. The speed control still works like a new one, the belt even looks like it was new a couple of months ago, but one of the small white Powermatic knobs is missing. There is a lot of surface rust, but no pitting. It looks like it has seen little use. A handheld feeler on a drill bit shank felt no runout. Looks like it was well worth a hundred bucks. Pictures later. Quote
Pwk5017 Posted May 9, 2017 Report Posted May 9, 2017 Nice! my Reeves drive doesnt work as well as what you describe. Im forever stuck at some unknown speed. It is either broke or dirty, and i dont care enough to fix it. Quote
Tom King Posted May 9, 2017 Author Report Posted May 9, 2017 Both pulleys, and the mechanism to move the one pulley that it pushes on, and releases, need to be kept lubed so everything moves freely. Those parts were the only thing the past owner kept oiled on this one, but fortunately it wasn't stored in a damp area. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.