Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Helping Hand at the Assembly/Outfeed Table

Featured Replies

  • Popular Post

We all have a list of low priority things we want to get to some day around the shop.  I had wished for this one off of my list a few times during the last couple weeks but, couldn't spare the shop time to take care of it.  I have a cheap little Columbia vise that has been rattling around since the dot-coms went bust.  I stuck it on the end of my outfeed but, never got around to adding a jaw with a dog hole.

5930b9fe37e25_SmallViseDog(1).jpg.bd403c18637fad5d89a1e026010a498e.jpg

I've been watching finish cure lately so I grabbed a piece of scrap, cut it to size and drilled a dog hole in it.  I fastened it using some old screws and the existing holes in the vise jaw.

5930b9fed396b_SmallViseDog(2).jpg.1aaf802ac935fec49353e71d49ec5921.jpg

Now I've got one more place to hold onto something if the bench is otherwise occupied.

5930b9ff528c4_SmallViseDog(3).jpg.ed233b327c4bd8be345abf1db61d0acf.jpg

5930ba0001622_SmallViseDog(4).jpg.ac506c7b2bba2075d751b13458c8947c.jpg

Wish I'd have stopped long ago and taken the 15 minutes this took. :huh:.  What's on your list?

I soon need to replace a shop cart that always seems to come in handy..

I need to centralize the most used tools in one spot close to my bench, instead of in 5 different cabinets in 5 different places.  I've already begun building. 

I also never seem to find the time to clean out my drawers .

Every try to cook a three-course dinner in someone else's run-down kitchen? That's where I'm at right now, trying to build a project in my FIL's shop. There is so much calibrating, maintenance, and organization that it's overwhelming. Right now I'd settle for a planer with parallel, sharp blades or a miter crosscut sled. So many jigs and cabinets needed, so little time and money. :)

  • Author
51 minutes ago, ClassAct said:

Every try to cook a three-course dinner in someone else's run-down kitchen? That's where I'm at right now, trying to build a project in my FIL's shop. There is so much calibrating, maintenance, and organization that it's overwhelming. Right now I'd settle for a planer with parallel, sharp blades or a miter crosscut sled. So many jigs and cabinets needed, so little time and money. :)

My deepest sympathies.  I am currently trying to help dad out in his shop . . .. at least I think his shop is still out there under all that junk that's piled on literally every flat surface except the washing machine lid; because it has to open.  I would have never given him that drill press table if I had known it was only going to give him more flat space to clutter up.

  • Author
  • Popular Post

Back when I would pickup just about anything that was a good deal I came across a bag of 1/4" bullet catches without strikes for a buck or two. 

5934526750294_SmallViseDog(5).jpg.d8ef607852db3f835c4acd305cef7d60.jpg

I use them for my bench dogs to allow them to stay put at whatever height.

593452680477e_SmallViseDog(6).jpg.4fdfbc232bba983f3ad16d3d4bba554a.jpg

593452689ec3b_SmallViseDog(7).jpg.1ab84a6ffd1a0d56f10ee3832fbddcdc.jpg

59345269664e6_SmallViseDog(8).jpg.d67bfa79413ce4829581fdcc13742db7.jpg

Another thing I did for planing really thin stock was to add a flat headed machine screw to a couple of the dogs.  The steel screw recesses a bit and I have never hit one . . . yet.

5934526a157bc_SmallViseDog(9).jpg.9f6546ceb3b21259525c7f4326ee96c1.jpg

5934526a9907f_SmallViseDog(10).jpg.5f47ff0ed4bb9d69b4cb487224b34ff4.jpg

This lets me hold stuff like so.

5934528be70ac_ThinStockDogs(5).jpg.5962f2653d99285aaa7bf92de2ae6ce8.jpg

5934528ca599e_ThinStockDogs(6).jpg.18be28a2da8bb51bb69fd4d5f8a6f3d7.jpg

So, after all that blah, blah . . . what I am trying to say in this post is that I did the same for the little add-on vise on my assembly/outfeed table.

5934526b500fd_SmallViseDog(11).jpg.75a83f206757e40ff582def2b7afee18.jpg

5934526c14406_SmallViseDog(12).jpg.7d889b95a21b9c4a1e914831ae5b711b.jpg

I didn't know I could go on so much about so little . . . OK, maybe I did know that :rolleyes:

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.