Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Which Plywood..?

Featured Replies

I'm preparing for a new project which incorporates the use of a variety of veneers. The plans recommend the use of "plywood" in certain parts. I know that I have to be careful in choosing plywoods under veneers. I'm thinking about purchasing a sheet of birch veneer plywood. Any thoughts about this..?

The better grades of Baltic birch are strong ,flat and almost free of voids in the core. The core is multi layer which adds to the stiffness. 

The good stuff is in 5x5 sheets from the former Soviet Baltic states. Appleply made in the USA is close and comes in 4x8 sheets. The Asian imported stuff is not up to snuff, I've tried it and was underwhelmed.

  • 3 months later...
On 7/12/2017 at 7:37 PM, wdwerker said:

The better grades of Baltic birch are strong ,flat and almost free of voids in the core. The core is multi layer which adds to the stiffness. 

The good stuff is in 5x5 sheets from the former Soviet Baltic states. Appleply made in the USA is close and comes in 4x8 sheets. The Asian imported stuff is not up to snuff, I've tried it and was underwhelmed.

this ... 

I would use BB for this as well I have just not seen anything close to decent plywood at the home centers. I just finished an outfeed table for my TS and was really disappointed with the birch plywood from Menards which actually used to be pretty good, pretty crappy and not very cheap at $48 a sheet. With my MN WW Guild discount I can get 3/4" BB 5x5' for $40ish so that's what I used where I could. 

8 minutes ago, wdwerker said:

Last time the OP was online is Oct 1. Question was asked mid summer....prettty sure he's made his decision by now. 

LOL good point :)

 

It still amazes me how much stiffer 3/4 BB is than 3/4 domestic Birch ply. Less flex translates into stronger, stiffer joinery. 

The Purebond you can sometimes get at the box stores is decent stuff - and the higher quality domestic ply you get at your hardwood dealer is even better - but it ain't no baltic birch, neither of 'em.  If I were veneering or doing anything that was critical to remain flat, I'd be using BB...and even then there's no guarantee.  Even the best ply will move.  That's why I prefer hardwood.  If it moves...flatten it. :)

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.