Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Curing times and limits of use until finish is fully cured

Featured Replies

I'm delivering a second desk this weekend to a friend/client (pics will come soon). The top will be done with Arm R Seal like the last one but we won't have the luxury of multiple weeks of cure time on the finish. He is prepared to just sit the desk in his office and not put anything on it for a few weeks but I'm curious how long is practical to wait for certain types of use after the finish has dried.

Depends, sortal like the underwear you'll being wearing when ya get old. :P

Some woods take the finish deep into the wood, thus taking longer to gas off, others don't.  Warm-cold-humid or dry conditions, how many layers of finish...all DEPENDS!

Safe bet 30 days for something like a desk top surface. That film needs to get good and hard. 

 

-Ace-

  • Author

Cool. It's walnut and will have about 6-7 coats like the last one I did. It will mostly be sitting to dry in my garage that, while insulated, does get fairly warm throughout the day since there's no AC out there. As I said, he's willing and prepared to just let it (in his words) "sit and look awfully pretty" in his office for 3-4 weeks after delivery before actually using it.

Not as familiar with ARS, but most wiping varnishes fully cure after 30 days, but can handle light use 7 days after application. In this case, i would be wary to let anything sit on the desk for days at a time, but if he puts his laptop on it to use for a couple hours, i dont see how that will damage the finish. Shoot them an email, i find general finishes to be pretty responsive. Heck, i find just about any manufacturer to be pretty responsive. I once spent 30 mins with titebond talking about glues....

31 minutes ago, Pwk5017 said:

Not as familiar with ARS, but most wiping varnishes fully cure after 30 days, but can handle light use 7 days after application. In this case, i would be wary to let anything sit on the desk for days at a time, but if he puts his laptop on it to use for a couple hours, i dont see how that will damage the finish. Shoot them an email, i find general finishes to be pretty responsive. Heck, i find just about any manufacturer to be pretty responsive. I once spent 30 mins with titebond talking about glues....

With oil finishes, they cure by gassing off through the finish. Through the gas off period, the finish remains soft, but dry to the touch. Depending on how many coats you applied combined with a heavy laptop or heavy bowl can print the surface. Also the heat give off by a laptop, can cause the young finish to go even softer, making that area more prone to damage.

Think of it like fresh latex paint. Dry to the touch but remains soft till cured. 

 

-Ace-

On 7/24/2017 at 5:20 PM, MisterDrow said:

will have about 6-7 coats

That's a lot of coats. :)  Kind of defeats the purpose of using ARS, IMO.  May as well brush on straight poly at that point.

On 7/26/2017 at 0:04 AM, Eric. said:

That's a lot of coats. :)  Kind of defeats the purpose of using ARS, IMO.  May as well brush on straight poly at that point.

Eric, could you elaborate on that please?  Are you saying ARS leaves a thicker coat than Poly and can therefore use less coats?

  • Popular Post
ARS is a thinned wipeable poly and only needs like 3 coats, leaves the wood looking and feeling like wood, not plastic. You start laying 7 coats of it onto something, you might as well just use regular poly and skip the extra coats. It'll save you some time.

Wow, Iceman! That's the best@Eric. impersonation I've heard all day!

 

[emoji2]

 

 

Yep what Lester said.  The advantage of ARS is that it's thin so you have more control over the film you're building (i.e. - not building a thick film) and maintaining a close-to-the-wood, natural looking finish.  If you're after a heavy film you might as well just glop on straight poly and be done.

6 hours ago, Lester Burnham said:

ARS is a thinned wipeable poly and only needs like 3 coats, leaves the wood looking and feeling like wood, not plastic. You start laying 7 coats of it onto something, you might as well just use regular poly and skip the extra coats. It'll save you some time.

What highlander said and that "mentor" stuff is rubbing off on you.  Well said.

  • Author
That's a lot of coats. [emoji4]  Kind of defeats the purpose of using ARS, IMO.  May as well brush on straight poly at that point.

Well chalk it up to lack of knowledge there. So I only need 3-4 coats of ARS?

  • Author

The last desk I made had 7 coats on it and did not have a heavy film at all. Maybe I'm putting my coats on too thin?

I usually go to four, and my fourth coat is heavily thinned.  Sometimes I'll stop at three and I can't ever remember doing five.  After four coats you've established a protective film...anything beyond that and you're just making more plastic and getting farther away from the wood.

  • Author

I was almost out of ARS and so I went ahead and put a coat of Seal A Coat (I know, I know... it's just diluted ARS) and then headed to Woodcraft to pick up some more ARS. Put three coats of ARS on it and called it good. Looks great, too. I'll post project pics when it's done in the next few days.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.