Popular Post Marmotjr Posted July 31, 2017 Popular Post Report Posted July 31, 2017 So my DC is just a blower motor on top of a 55 gal drum, and then it vents to the bag from there. Every so often, I'll lift the lid to check the level of the sawdust. It was only about 1/2-2/3 full, but I didn't appreciate how far down the tube stuck off the end of the blower into the dust. I'm turning the other day, and with the DC going, I wear bluetooth ear protection. Every now and then, I'd hear this thump. Eventually figured out it was coming from the DC when I noticed the dust shooting up under the seal of the bag. Bag was full of chips and dust, it's usually just a light coating of dust. So I dump the bag into the firepit out back, and shop vac out the contents of the drum. While the drum is on wheels, they're small and wouldn't handle the yard well, and it's back in a corner behind a bench and the drill press, so I didn't feel like dealing with it. Built a small fire on top of the dust pile with some scraps, and lit the whole pile all the way around. Once it got burning, I was surprised at how hot it was. Even in the 90* temps we had, I could still feel the heat from a few yards away. Got out the IR thermometer gun and it was registering over 800* in some places. Now, I tell that anecdotal story to tell you this one. My mother grew up about a 1/4 mile down the hill from a lumber mill. My grandfather used to heat the boilers in the garage for the radiators in the house by burning sawdust. My grandfather would go up to the mill every couple weeks and fill a couple truck loads of dust and bring it back down, for free. Until I burned this pile, I never appreciated how efficient that was. That pile burned for about 5-6 hours before it started to cool off, didn't take up much space, and put out a lot of heat. No real point to this story, just felt like sharing. 3 Quote
Tom King Posted July 31, 2017 Report Posted July 31, 2017 Sawmills used to burn sawdust for heating their kilns. They had one guy that would watch the temperature in the kiln, and shovel sawdust as needed, so the cost of operating the kiln was that guy's salary. The last one of those I knew about went out of business in 1992. Quote
Bankstick Posted July 31, 2017 Report Posted July 31, 2017 I threw a bucket of fine wood dust on a fire and it flashed like gasoline. Fine dust and a spark can blow up a grain elevator. Sawdust can be useful if careful. 1 Quote
mat60 Posted July 31, 2017 Report Posted July 31, 2017 I think they make fire bricks out of compacted sawdust. Mix it with some old lacquer and let it dry and it makes a great fire starter in the wood stove. Quote
wtnhighlander Posted July 31, 2017 Report Posted July 31, 2017 The Mythbusters demonstrated a sawdust 'bomb', by blowing compressed air up through a barrel of dust, and igniting it. Very impressive fireball. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.