Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Dust Collection on 14inch Jet bandsaw

Featured Replies

Hey All,
I recently opened up my Jet bandsaw to discover it was jam packed full of dust despite my use of dust collection,  I poked around and discovered that the factory dust port has a super narrow slit which was also full of dust. That explains why this machine has been so dirty lately but that dust port seems like a design flaw.   

So I'm looking for advice on upgrading the dust collection on this 14 inch bandsaw.

Thanks!

Rich

Now that you know that the slit is there you may have to get in the habit of checking to make sure it isn't blocked.  But I think I would call Jet and talk with their techs to see what the purpose of the small opening is and what would happen if you were to make the opening larger.

What saw is it?  My Craftsman BAS350 has both a 2.5 inch port and a 4 inch port.  The 4 inch, for some ungodly reason, is blocked by about 80 percent, leaving only a small gap on the bottom.  I truthfully don't run any dust collection on the bandsaw usually as I'm usually just making small cuts with it, but when I do I just plug my dust vac onto it because of the lousy design of the 4 inch port. 

On 8/10/2017 at 4:32 PM, wdwerker said:

I saw where one guy held the lower dust chute in place with magnets.

 

I use magnets and a little housing I made for my larger bandsaw (pictures follow).  But, this is my favorite solution for 14 inch CI saws.

58eab5e731bea_BSPVCDC.JPG.67220735c943256a2e6544a72f955411.JPG

A piece of PVC Tee is strapped to the trunnions so that the opening faces the blade.

G0513X-DC-Add 001.jpg

G0513X-DC-Add 002.jpg

G0513X-DC-Add 003.jpg

G0513X-DC-Add 004.jpg

G0513X-DC-Add 005.jpg

G0513X-DC-Add 006.jpg

G0513X-DC-Add 007.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.