DavidQ Posted October 26, 2017 Report Posted October 26, 2017 (edited) I have been looking for a jointer for several months and came across this one. I am finding limited reviews on it and unsure if the price is acceptable. Looking for guidance of some more experience woodworkers https://jackson.craigslist.org/tls/d/8-jointer-planer-yates/6360585856.html Edited October 26, 2017 by DavidQ Quote
Dknapp34 Posted October 26, 2017 Report Posted October 26, 2017 Seems pricey for a used jointer. For just a little bit more, you can get a new Grizzly 8" jointer with a warranty and a blade guard. Using that thing without a blade guard would make me pucker up every time. Quote
Just Bob Posted October 26, 2017 Report Posted October 26, 2017 Vintage Machinery is where I would look to find the info on the jointer. Looks like there are several over there that have been restored. They also have a forum for asking questions. Here is the link: http://vintagemachinery.org/home.aspx Quote
minorhero Posted October 27, 2017 Report Posted October 27, 2017 I own an old Yates American lathe. They made some really nice equipment and I am quite happy with my lathe. That said, the rounded base machines like the jointer you are interested in have a rubber gasket/guard at the bottom which contacts the floor. This is a completely irreplaceable part and is prone to wearing out on these machines early. The jointer you are looking at is likely 60+ years old to give you an idea. Frankly his asking price is too high. The seller is definitely taking into account the hours (and it will likely have been many) that he put into the jointer fixing it up. Regardless of those hours this is still a 60+ year old jointer which will have multiple parts that are totally irreplaceable when and if they break. I would say 500 is fair assuming its in great condition with no cracks in the castings, the fence stays 90 degrees even after multiple passes of board, the motor sounds good, and the bearings have been replaced sometime in the last 10 years, plus the rubber gasket/guard is either in good condition or has been replaced with something that keeps the machine relatively stable on its feet. Quote
DavidQ Posted October 27, 2017 Author Report Posted October 27, 2017 I appreciate your replies and the information. I am currently storing and using my father in laws delta 6inch jointer, but I will need one of my own in the near future. Quote
Coop Posted October 27, 2017 Report Posted October 27, 2017 6 hours ago, Dknapp34 said: Seems pricey for a used jointer. For just a little bit more, you can get a new Grizzly 8" jointer with a warranty and a blade guard. Using that thing without a blade guard would make me pucker up every time. +1 Quote
DavidQ Posted October 28, 2017 Author Report Posted October 28, 2017 Contacted the seller and he was pretty firm on the price. I'll continue looking. Quote
wdwerker Posted October 28, 2017 Report Posted October 28, 2017 I wonder why he is selling it after doing so much work on it ? I'm sure you can find something better, be patient or pay for new . Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.