Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

How important is sheen when finishing Curly maple?

Featured Replies

I am getting ready to finish a nightstand with a curly maple top. My plan is to follow an online tutorial I found that starts by applying  a coat of Blonde shellac with a small amount of transtint dye added. Followed by fairly aggressive sanding, and then the application of several topcoat layers. I have some arm-r-seal left from a previous project with a satin sheen. It struck me that a  semi-gloss may enhance the curly effect better than a satin sheen. So the question becomes, does it make sense to stick with satin, or should I go with a semi-gloss?

Thanks in advance for any thoughts on this.

Simple...... Take a couple of scraps of your Maple, and apply each finish... Then you'll find what suits your eye.

Assuming you are meaning for the top coats, that total preference. I prefer the look of ars satin. I've used the semi gloss as well. Like Richard said, make a few testers and you'll know what you like.

The chatoyance of the curl will be visible through both. You will see it better indirectly viewing with satin I would guess but until you lay it down, you won't know for sure

Before you work the project. Do your finish schedule out on scrap. You may find the "online" my not be your taste. You could find yourself adding more or less dye.

Satin is the way to go. 

 

-Ace-

  • Author

Thanks for the quick advice on this. I have been playing around with various dye concentrations on test boards and have actually found that regardless of dye concentration level, I get best results with 2 applications of the shellac dye mixture (haven't tried three applications yet, but I am running out of test boards :) ). Two applications was not called for in the online tutorial I found, so doing the test boards has been hugely beneficial. 

I don't have any of the semi-gloss arm-r-seal on hand, so I have not yet done a satin v semi-gloss test. Based on the advice above I don't think I'll actually need to go buy a can. I see nothing to suggest that semi-gloss is fundamentally superior in this application. As I tend to prefer satin over semigloss generally, I think I will go with what I have.

Thanks again for the thoughts on this. I'll post some pictures of the finished product on this thread in about a week once it is all completed.

To really pop the tiger. I skip the shellac, I do a dye in alcohol, sand back, do it again and sand back. Then use, General Finishes Seal-A-Cell to really drive the dye into the curl, while at the same time the oil gives the flat grain some color. When completely dry, then I will topcoat. 

 

-Ace-

Be sure to post a pic of the top when you get it done.  I wnat to see what the dye did to the maple.  No experience there

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.