Popular Post Robert Morse Posted November 20, 2017 Popular Post Report Posted November 20, 2017 So this project started 2+ years ago, right as we were getting ready to list our previous home for sale. We love making pizza on our Big Green Egg, or in the oven in the winter when the weather doesn't cooperate. But getting the pizza on and off the egg without a peel was really a pain. After the second dropped pizza, I glued up some 3/4" thick walnut and maple scraps, then used the band saw to cut out the rough shape at the old house. And then we moved, and it was left in the back corner of the garage to ripen for another 19 months. I re-discovered it a week or so ago while cleaning. I decided that 3/4" was too thick, and at 15" wide, there was no way it was going thru the planer. So I sawed it in half lengthwise (thanks track saw!) and planed it down to just under 1/2" on the DeWalt 735. Then I glued it up, and managed to flip the sawed off piece upside down in the process (you can see the line in the top band of maple in the picture). Once the glue up was dry, I took it inside and made a huge mess at the dining room table by planing the front edge down to a suitably thin profile with my beat up old Stanley #4. I should note, originally the handle had a beautiful knob on the end with curly walnut - it really was gorgeous... I cracked that part while drilling with an auger bit (should have predrilled first for the lead screw of the bit, BIG FAIL), and had to saw it off to the shape you see now. Lesson learned, but it also seemed like a good excuse to pick up the Ridgid 4424 sander, so I used that to clean up the band sawn edges and faired the curves from the handle to the flat part of the peel body. Next, I rounded over the edges with a 1/8" round-over bit, and started sanding. And sanding and sanding. I started at 80 grit, and went up to 220 on the ROS, and then hit it with 320 on a sanding block. I used a scrap of 320 to hand sand the edges where the router bit burnt the wood a bit... Finally I brought it in, and gave it a very liberal coat of butcher block lotion (bees wax and mineral oil). The Wife is happy, and other than having to cut off that beautiful chunk of curly walnut on the handle, I'm happy with it too. Thanks for looking! 4 Quote
Pwk5017 Posted November 20, 2017 Report Posted November 20, 2017 Looks good, my wife and I also love pizzas on the egg. I made two peels(always need a free one to make the next pizza), and two things I like about my peels. First, long handles. I think my handles are 3' long and when the egg is roaring at 650+ I don't want to be anywhere near the grill. Second, I planed a back bevel on the bottom of the peel. I find this helps provide a leverage point to work under the pizza. Quote
Robert Morse Posted November 20, 2017 Author Report Posted November 20, 2017 Thanks! The back bevel is a great idea... As for the handle length, I thought about a longer one, but storage is an issue. This one can fit over the fridge. And as long as my hand doesn't have to go over the gap between the rim and plate setter, I'm good. Quote
bleedinblue Posted November 20, 2017 Report Posted November 20, 2017 I'll be making one of these for Christmas and I like your short handle design better than the long, primarily for storage. Granted, the one I make will be used with a conventional kitchen oven and not a super hot grill/stone. Quote
Pwk5017 Posted November 20, 2017 Report Posted November 20, 2017 I hang mine on the wall in my kitchen when not in use. Each handle has a tether of leather attached to it that slips over a coat hook/knob thing. Looks pretty cool on the wall, imo. The one is crotch walnut, which would look cool in any setting. Anyways, i totally get your point about horizontal storage. It would be stupid to lay mine flat anywhere. I enjoy the furniture i make for my house and family, but stupidly, these peels and the huge end grain cutting board i made myself are possibly my favorite woodworking projects. Incredibly satisfying when a simple project looks great and performs even better on a daily/weekly basis. Quote
difalkner Posted November 21, 2017 Report Posted November 21, 2017 Very nice; and useful, as well. Good job, Robert! David Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.