Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Doug Fir Mantel Finishing Problem

Featured Replies

I have a situation I hope someone can help with.  I installed a Doug-Fir Mantel, 16 inches above a gas fireplace.  It was finished with MinWax penetrating stain and top coated with 3 coats of water based MinWax Polycrylic.  After drying for 3 months the fireplace was fired up and the mantel started to blister on the underside of the mantel.  The temperature on the underside of the mantel is 160F.  Anyone have a solution?  MinWax states their products are only good for 120F.

Yea, that's an issue with either the fireplace or the location of the mantel.  I installed one on a gas fireplace (in fir too) with a WB finish and it's still holding up very well.  It was more than 16" away tho.

  • Author

The mantel was installed 2" above the fireplace manufacturer's instructions.  The fireplace is a sealed radiant fireplace, very efficient.

4 minutes ago, Woodworker318 said:

The mantel was installed 2" above the fireplace manufacturer's instructions.  The fireplace is a sealed radiant fireplace, very efficient.

If that mantel is hitting 160 degrees, something is wrong!

In the past I have seen requirements for distance up from firebox and limit on how far out the mantle shelf can come. If you want a deep shelf it has to be higher up. 

8 hours ago, Woodworker318 said:

The mantel was installed 2" above the fireplace manufacturer's instructions.  The fireplace is a sealed radiant fireplace, very efficient.

That efficiency may be biting you. A stanrd wood burning fireplace looses much of its heat up the chimney. Yours seems to be putting all its energy into the room. Is there no fan included with it, to help move the hot air away from the wall & mantel?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.