Coop Posted April 8, 2019 Report Posted April 8, 2019 I have a friend that just called and has this saw. For the last week or so, he has had trouble raising the blade. Now, it won’t raise at all. Anyone have experience with this? Quote
Dave H Posted April 8, 2019 Report Posted April 8, 2019 I have a 4100 it's a jobber saw when I'm doing carpenter work, I've only had it about 2/3 yrs never had a problem with it. I had a similar issue with a rigid table saw I had, it turned out it was sap and saw dust build up on rack and pinion gears, compressed air, mineral spirits tooth brush, dental pick and elbow grease got it working again. I will go look at my jobber saw an see what the mechanism is on the 4100. Quote
Dave H Posted April 8, 2019 Report Posted April 8, 2019 The 4100 of mine isn't a rack and pinion set up, it is raised and lowered by a threaded rod that a stationary nut that is connected to the blade assembly, an external hand wheel operates the every thing I'm wondering if the bolt and nut are all clogged up with smutz or rust and needs a good cleaning, there is nothing in my manual that speaks of this situation but it says elevation, support rod, and gears need to be cleaned and oiled periodically with SAE no. 20 or 30, or WD 40 makes sense to me. Good luck Coop 1 Quote
Coop Posted April 8, 2019 Author Report Posted April 8, 2019 Higtron, I appreciate you doing that. This guy and his wife both are clean freaks. Not that that’s a bad thing but he blows this thing out and wipes the gears down with a brass brush every time he uses it. He did say that the motor rides up and down on two shafts and I’m wondering if they came out of alignment some way and are no longer parallel. Poor fellow is not a mechanic in any stretch of the imagination. Quote
drzaius Posted April 9, 2019 Report Posted April 9, 2019 3 hours ago, K Cooper said: he blows this thing out and wipes the gears down with a brass brush every time he uses it Your friend has a problem. 2 Quote
Coop Posted April 10, 2019 Author Report Posted April 10, 2019 My friend disassembled something or another and replaced plastic nuts ( ) with metal wing nuts and put it back together and all works fine. 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.