wehope Posted November 13, 2020 Report Share Posted November 13, 2020 I have an 8" joiner and I regularly have boards that are wider than 8". I was using carpet tape and plywood scraps to be able to run the boards through the planer, get the opposite side flat, pull off the plywood and remove the lip that was left from the joining process. But i frequently didn't have an appropriate scrap of plywood. Sometimes the carpet tape pulls the veneer off the plywood. So I decided to make a jig for the planer by using UHMD plastic, 3/4 plywood and a couple scrap blocks to make a jig for my planer. Build & usage: 1 Quote Link to comment Share on other sites More sharing options...
Coop Posted November 14, 2020 Report Share Posted November 14, 2020 Great idea. Thanks for sharing! I don’t mind hand plane work but this just looks much easier! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.