Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Urn - Family Dog

Featured Replies

  • Author
  • Popular Post

Starting to get the drift here.
Skillet(20).thumb.jpg.ee556abc4dad9b1ee6ac968cb9ac73fa.jpg
The sides of the new piece will be arched to echo the existing piece.
Skillet(21).thumb.jpg.ecec8cfc6bdc0fac6609800986b25f90.jpg
I am concerned that the overall height may not meet with LOML's satisfaction but it is what it is. We like the idea of the urns being together so the pair may have to relocate. I will worry about that when the time comes.

Is the plan to display them stacked, as in the second photo?  

  • Author
  • Popular Post

That is the plan.  The son's urn nests into his dog's.

I  have a bunch of oddball templates for drawing curves. These live in a drawer as I have collected quite an array over the years. At any rate I draw the curve I am after on the box corners. Unfortunately I didn't take a pic before I removed some material but I think you get the drift.
Skillet(22).thumb.jpg.621b4b4b3a3ea182f91399ffd8543b92.jpg
I then use the tablesaw to remove the bulk of the material.
Skillet(23).thumb.jpg.e2564e19d2793486c1e02eb6da4665fb.jpg

BEEP, BEEP, BEEP, BEEP . . . Back it up . . . . Mark J rightfully called me out on the picture above.  It was staged after the fact and the orientation of the box is not good.  Some people do this; I do not.  It was hot in the shop and I took the pic out of laziness.  My apologies.  I only ripped the long sides. 

Skillet(25).thumb.jpg.ffe6373c2895cea3296b74696cfefeec.jpg

I did the short sides completely at the edge sander.  We now return you to your normal programming :D


I clamp a scrap of ply to the edge sander to make a tall fence. I then rock the box to make the roughed out angles into roughed out curves.
Skillet(24).thumb.jpg.f0666da092055fa2325db58e0f99af29.jpg
Some hand work on the curves at the bench and I should be ready to slap some finish on this. While it cures I will make the bottom panel.

4 minutes ago, gee-dub said:

That is the plan.  The son's urn nests into his dog's.

Then the shorter height of the lower urn may actually work out for the better (aesthetic). 

Excuse my inexperience talking here, but isn't there some risk of kick back with that TS cut?

  • Author
  • Popular Post
On 9/17/2025 at 7:34 AM, Mark J said:

Excuse my inexperience talking here, but isn't there some risk of kick back with that TS cut?

I should have set that picture up differently.  Shame on me.  I just did what I chastise others for doing online :angry:.  You are correct that you do not want to use the short edge against the fence when a piece is captured like that.  I actually did the short sides completely at the edge sander.  I only angle ripped the long edges.  I will also add . . . push blocks, push blocks, push blocks :).  I'm going to go back and add a more appropriate pic.

***UPDATE*** Pic added above. Kudos to Mark J for doing the right thiing ;)

  • Author
  • Popular Post

My goal today was to get the base color on. I need to match an urn made back in 2017. This is just base color, no film, no top coat.
Skillet(25)_renamed_17897.thumb.jpg.648b28657d780bf40ab1ae1975d86d6b.jpg

Skillet(26).thumb.jpg.b6183f620ab5c8b9e884da010b4ad538.jpg

Skillet(27).thumb.jpg.e4fc5596ea1e8efebdca8a74791c028a.jpg
I wanted to complete this by the end of day today and I got it done before lunch so I am riding high. It needs 24 hours before I can move on finish-wise. I can, of course, work in the bottom panel, feet, date stamp, etc. Thanks for letting me milk this along. It was a hard project to start and I would even find myself out pulling weeds rather than working on it. By posting here it helps drive me forward.

  • Popular Post
On 9/17/2025 at 1:15 PM, gee-dub said:

It was a hard project to start

I completely understand. I had to say goodbye to my beloved Lab Louie 4y ago and am ashamed to admit i still haven't built a proper urn for his remains. Good on you for powering through it. 

Glad we can be of help. You share a lot of good knowledge and I am happy if I can contribute to giving back to you 

  • Author
  • Popular Post

Pretty happy with the color match. For me it is hard to match older finishes. This is one advantage of the forums. I was able to go back to my son's urn build and remind myself of what I used for a finish. No surprise; oil:varnish blend. Here it is wet.
Skillet(28).thumb.jpg.1fa6a35887dd166340e3ff3610b18578.jpg
This is a wipe-on / wipe-off finish. Once wiped off the match looks pretty good. Sorry for the blurry foreground in the pic but, you get the drift on the coloration.
Skillet(29).thumb.jpg.df243ade4dfcfa4b26c3ec2854025c09.jpg
I may need to buff out the finish to get a little more gloss out of it. We'll see after it cures overnight.

  • Popular Post

Looks perfect, @gee-dub, both the color match and the craftsmanship. Such a nice final resting place, lovingly crafted. Very inspiring. Thank you!

Seconded. Nice job and a very thoughtful piece. Thank you for sharing.

Great job.  I really like those curved finger joints.  They add a lot of interest  to the pieces.  

  • Author
  • Popular Post

@Mark J  Thanks.  The cool thing is that they are really easy to make.  You just start out with a material thickness that will accept the curve, cut the fingers to the scale you like and hack off the extra material. Here's another version for a client who wanted vertical.

Urn-Mike(44).jpg.4540848b323a6df0e99a9f312bb2115f.jpg

  • Author
  • Popular Post

I just wanted to close the books on this one.  

Skillet(30).thumb.JPG.85e1b9634ba9e9a9212d8937fa8ffe77.JPG

A boy and his dog.

On 9/25/2025 at 10:35 AM, gee-dub said:

I just wanted to close the books on this one.  

Skillet(30).thumb.JPG.85e1b9634ba9e9a9212d8937fa8ffe77.JPG

A boy and his dog.

This is the most heartwarming thing I've seen in a long time. 

I've shown my wife and family. 

That is a reason to woodwork.

On 9/25/2025 at 10:35 AM, gee-dub said:

I just wanted to close the books on this one.  

Skillet(30).thumb.JPG.85e1b9634ba9e9a9212d8937fa8ffe77.JPG

A boy and his dog.

Both would be very proud! 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.