Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Urn - Family Dog

Featured Replies

  • Popular Post

My wife lost her son to heart failure about a decade ago.  We inherited his American Boxer mix mutt.  She became part of the family and lived to be around 14.  She was wonderfully trained.

Skillet(2).jpg.371b09006085fe0baeb8c52598722daa.jpg

But later in life looked like this a lot of the time. Z-z-z-z-z-z . . . 

Skillet(1).jpg.093b89afa714065714e9c04b054bd9cc.jpg

She passed a while back and I have found it hard to 'get around' to making her urn (darned dog).  I am using this journal to help me get through the process.  Those of you who have lost loved animals can relate.

Pardon me reviewing some of the basics but I hope this journal will keep me moving along.  I use witness marks to track the progress of flattening a blank at the jointer.

Skillet(1).thumb.jpg.80283c25bb1cd455445f001cfa828d85.jpg

The board teeter-totters so I use scrap[s of waste to split the difference and allow me to conserve stock.

Skillet(2).thumb.jpg.c43f62f37d8d4f0a045f11ae59ba022a.jpg

I have a plastic tube screwed to the jointer where I stash thin cutoffs to use for this purpose.

Skillet(3).thumb.jpg.260644c0271e00e8bab9fb900bf9f2e5.jpg

With the first pass I get a couple of "lands" to use for reference (shown here with the white pencil marks).

Skillet(4).thumb.jpg.f124d4cafb62ca6c5e7bdd743b851d98.jpg

Another pass gives me a flat and true face.  I guess it is a good time to remind everyone of the milling acronym FEE . . . Faces, Edges, Ends.

Skillet(5).thumb.jpg.4bc7635693e6eb60b77c478c4a16e177.jpg

Witness marks can help out on the edges as well.  I thought this edge was done but the pencil marks tell me otherwise.

Skillet(6).thumb.jpg.17fea7b35c603751e3d3ae35274ea804.jpg

Once the faces and edges are true we can cross cut to length.

Skillet(7).thumb.jpg.edbbe52a5b45175cef173410dd9eba90.jpg

Skillet(8).thumb.jpg.b18c9e58ebeb7e02470ebb30edaa4c6d.jpg

This will be a finger-jointed box that will act as a platform for my step son's existing urn. 

Dave-Urn(11).jpg.6d66d043affe9f67641c9c0b6115bf68.jpg

It will make more sense in a few more posts.

 

 

 

 

Sorry for your loss. Thank you for sharing. I look forward to seeing the rest of your process.

That is a sad story (x2).  

 

After the jointer operations I assume you used a planer on the board.

  • Author
  • Popular Post
On 9/5/2025 at 5:59 AM, Mark J said:

That is a sad story (x2).  

 

After the jointer operations I assume you used a planer on the board.

Thanks guys and correct.  I face joint, then plane to thickness, edge joint, rip to width, and cross cut to length.  Faces, Edges, Ends.

  • Author

Had to evacuate last night due to a fire in the nearby hills.  All seems well this morning but the evacuation order is still in effect.  Some streets closed but not ours specifically.  We will keep a diligent watch and be ready to go again if required. Obviously haven't made any progress on the urn :rolleyes:

  • Author
  • Popular Post
On 9/6/2025 at 9:35 AM, Ron Swanson Jr. said:

@gee-dub that must be stressful. I hope that it all passes without harm. 

Thanks.  Fires are like earthquakes here; we just take them in stride.  At least you know there is always going to be a fire . . . earthquakes are more unpredictable.  Folks in the southeast have hurricanes all the time.  The mid-west gets tornadoes.  We get fires.  You know the seasons and you know they're coming.  It's not a matter of if, it's a matter of when :D.  Hope to get back in the shop in the next couple of days.

  • Popular Post

Sorry for you loss, it is always hard to lose the family pup.

We have never had to evacuate but a few years ago we felt like we were surrounded by close ones and there was so much smoke that it felt like dusk all day long for about two week.  One of the fires wiped out our favorite redwood state park.

  • Popular Post

I was just thinking about you guys yesterday when the news showed another fire.  I was thinking, there's not only the risk of actual fire, but that there must be a lot of smoke.

19 hours ago, gee-dub said:

Fires are like earthquakes here; we just take them in stride.  At least you know there is always going to be a fire . . .

Just trying to imagine having to evacuate, I mean what do you even try to take with you, and how long do you take packing.  

  • Popular Post
On 9/7/2025 at 6:02 AM, Mark J said:

I mean what do you even try to take with you, and how long do you take packing.  

I know it is different now because most photos are on peoples phone but it used to be "family photos were the first thing out the door" because it is probably the only thing you own that can't be replaced.

  • Author
  • Popular Post
On 9/7/2025 at 6:02 AM, Mark J said:

I was just thinking about you guys yesterday when the news showed another fire.  I was thinking, there's not only the risk of actual fire, but that there must be a lot of smoke.

Just trying to imagine having to evacuate, I mean what do you even try to take with you, and how long do you take packing.  

We were born into earthquake country.  You generally have a go-bag as part of your life style.  It contains a thumb drive with all your important documents on it, a few changes of basic clothes and any required meds.  This is not hard to put together or maintain.  It will slip your mind every now and then and you have to do a face palm and take 5 minutes to refresh some items.  It's not like you're planning for Armageddon, you just need enough to get by for a few days. Much more of a challenge for folks who do not have family nearby . . . ergo, we took our neighbors with us :D.  I'm sure people who live in hurricane, flooding, or tornado areas do the same if they are smart.  Suddenly trying to decide what to grab as the fire is licking at your back porch is not a good idea :D.  Sorry, I've gotten a bit off topic here.  Hope to be back in the shop today.

Glad you guys are safe bud and am sorry for the loss of your pet. Our son lost his wife 4 years ago and he had to put their 16 yo dog down last month. Kind of know what you’re going thru. 
As far as our hurricanes, at least we can watch the storm come across the Atlantic and sometimes into the Gulf and can usually have plenty of time to prepare. 

  • Author
  • Popular Post

I mark parts with chalk as it is easy to remove or just comes off as parts are milled / prepared.
Skillet(9).thumb.jpg.1cf8129403a77be9cab3d0f11234f99d.jpg
As with most ZCI-like items I make them in batches. I "flat-twine" these and stash them in a corner.
Skillet(10).thumb.jpg.b0fa5ce9a4a074d45fa32ee3166c722f.jpg
A mod I made on the i-Box is to add a second miter bar. Ignore the through-hole, it just happened to be in the UHMW scrap that I used.
Skillet(11).thumb.jpg.f6e111cf5ee1f27555ec3fcc9b76cd8c.jpg
I also add old sandpaper to the backer boards. This just helps secure the stock and makes the fingers cleaner.
Skillet(12).thumb.jpg.6ec217665a606b4880be279751377fc6.jpg
Unfortunately the i-Box requires at least a couple of test cuts. Fortunately you can do these with almost anything that you have laying around.
Skillet(13).thumb.jpg.d61f019d1c360140ca4765cc93aa0d06.jpg
Ever onward . . . .

Gee-dub: with apologies as I'm struggling with a sensitive way to ask this, but how do you figure out the needed volume for your urn builds?

  • Author
  • Popular Post
On 9/8/2025 at 6:04 PM, Von said:

Gee-dub: with apologies as I'm struggling with a sensitive way to ask this, but how do you figure out the needed volume for your urn builds?

1 cubic inch per pound of "healthy" weight.  This is an awkward part of the process.  Skillet was about 70 pounds before she started to decline and her ashes are about 55 cubic inches.  I use a synthetic fiber pillow fill to wrap the "package" . . . sorry, I know this is a little discomforting.  The last thing you want is an urn that is not quite big enough. There are outer dimensional limits if the urn will be interred. The wrapper makes a secure, solid fit for the plastic wrapped remains.  No one wants to feel their departed shifting around in the urn.

Thank you. I appreciate hearing the awkward details from a trusted source.

Glad to see you are safely back in your shop (and house).

  • Author
  • Popular Post

My back went out and cost me a couple of days :angry: . Got back at it (no pun intended). Continuing on from the previous post the fingers are cut on the prepared blanks. I do use a leather-faced handscrew to secure the material when using smaller pieces.
Skillet(14).thumb.jpg.17cdafa52e6ff42bf1bf313521db201f.jpg
You end up with this familiar form.
Skillet(15).thumb.jpg.142c140eee2a051b930f1fd93f5d9406.jpg
I should have (re)mentioned that when I am working with epoxy I will take what is left over and back-fill my ZCI's. In this case it is the dado plate for my Saw Stop.
Skillet(17).thumb.jpg.5836f0d5cf21bf5b4e6fd06e5f30b57b.jpg

Skillet(16).thumb.jpg.bf2d1414306575a44ab8b562aaeca5a3.jpg
I cut a chamfer around the top at the router table. I then need to do a little detail chisel work.
Skillet(18).thumb.jpg.e0369bf5e39bd8c02252aa49c6d5be0b.jpg
The bench-on-bench helps to elevate the small piece and save neck and back pain. 
Skillet(19).thumb.jpg.288050925a013bfb94def88dcad6910f.jpg
Moving along . . .

Sorry to hear about the back taking you out for a little bit. I deal with a similar-sounding issue. I have a much-less-nice bench-on-bench (basically a couple miniature I-beams) that I find also makes me a lot more comfortable.

  • Author
On 9/14/2025 at 10:28 AM, Von said:

(basically a couple miniature I-beams) that I find also makes me a lot more comfortable.

I have some I-Beams as well. Super useful. The B-on-B was something I saw in a trade rag and got obsessed with :D

That's a great idea. I'm 6' 1", not exactly NBA height, but tall enough that working at bench height can get tiresome in a hurry. 

  • Author
  • Popular Post
On 9/14/2025 at 12:49 PM, Ron Swanson Jr. said:

By the way @gee-dub are you keeping the proud finger joints? I think they look fantastic!

I am a big proud joinery fan . . . 

C0DPegs(5).jpg.930e46107289b1c8a1024c53e0934fca.jpg

GnGWallCab(165).jpg.4106a5b77b8efd183f7fe49fba44b60a.jpg

But this urn will echo an already existing one and so will have flush fingers on an arched set of sides as shown in the last pic in the initial post.  I am due for a seriously hardcore G&G piece though . . . I just love that stuff.

 

  • Popular Post
On 9/14/2025 at 2:55 PM, gee-dub said:

 I am due for a seriously hardcore G&G piece though . . . I just love that stuff.

 

So do I! It was such a big shift to move to showcasing the joinery instead of hiding it. I really like it a lot. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.