Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Free Triton TRC001 3.25 HP router

Featured Replies

  • Popular Post

Anyone have a use for a Triton TRC001 router?   1/2" collet, 15 amp, 3-1/4 hp motor with soft start and variable speed control (8,000-21,000 rpm).  I bought it to go in a router table, but that turned out to be inconvenient, so I went with a motor and router lift.  I've used it occasionally as a hand held router, but it's heavy and I never need that kind of power.  So, it's got low mileage.

But, the company is in some kind of Australian receivership and I can't get parts easily.

It works fine except that the collet has slipped on me a couple of times.  I probably won't ever use it, and I don't want to just put it on a shelf and forget about it.  If no one here wants it, I'll put it on Craig's List.

Can you say more about why you found it inconvenient in your router table?

I have a Milwaukee 5615 in my router table which does not have variable speed control, a feature I want for larger bits. I could imagine the Triton going into my table and freeing up the Milwaukee as a second handheld, which would be a nice addition to my plunge router.

Thanks for asking.

  • Author
  • Popular Post
On 1/10/2026 at 7:11 PM, Von said:

Can you say more about why you found it inconvenient in your router table?

It isn't a motor in a plunge or fixed base like the Bosch, DeWalt, or Porter Cable.  The motor is built into the unit which can be configured as a plunge base or a router lift.  It has removable plunge springs, a crank to raise and lower it from above the table, and is designed so that you can change bits from above the table. 

The problem is that it's got a safety interlock so that you can't change the bits without turning off the power switch.  So, if it's plugged into an external switch, you have to reach under the table to turn off the "real" power switch to change bits, even if it's turned off at the external switch.  I guess that's a nice safety feature, but on my table it was a deal breaker.

I never used it in a table, so I can't speak to how well that works.  As a plunge router it had a lot of nice features like micro and course adjustments, but the controls were a little non-standard and over-complicated.

  • Author

I asked ChatGPT, Can you crack a Triton TRC router open to remove the motor? If so, can you mount the motor in a router lift under a router table?

It's detailed three page answer was that it's possible, but difficult, and the motor might not fit a router lift without some jiggery-pokery.  At a minimum you'd need to do something about the power switch and speed control.

Keep in mind that ChatGPT may be partially or completely wrong.

  • Popular Post

I’m probably a little anal but I turn the power off to my router before changing bits as well as the power to my ts before changing blades. I found that a power strip with a lighted switch helps to remind me.

IMG_0279.thumb.jpeg.bb3297a166c48449a230ddd86972c41a.jpeg

On 1/10/2026 at 8:08 PM, Beechwood Chip said:

I asked ChatGPT, Can you crack a Triton TRC router open to remove the motor? If so, can you mount the motor in a router lift under a router table?

It's detailed three page answer was that it's possible, but difficult, and the motor might not fit a router lift without some jiggery-pokery.  At a minimum you'd need to do something about the power switch and speed control.

Keep in mind that ChatGPT may be partially or completely wrong.

That sounds like a recipe for a missing digit or two :)

IMG_20260110_220046957.thumb.jpg.9c4cdc6f1ace4b35a52d44a378ab84c4.jpg

Hey Chip, thank you for your generous offer, but I'm going to pass. In a nutshell, I'm fairly sure I would come to the same conclusion you have.

BTW, here is an in-depth review of the router (from 2003!) for anyone else who might be considering: http://nhwoodworker.com/triton/

On 1/10/2026 at 9:10 PM, Coop said:

I’m probably a little anal but I turn the power off to my router before changing bits as well as the power to my ts before changing blades.

That's SOP for me as well, I do it by unplugging the router from my external switch on the table. But my understanding is that wouldn't engage the safety interlock on the Triton, and you'd still have to hit the power switch. And, I don't believe the Triton comes out of the table easily from looking at it, so that means a lot of fumbling around under the table without a lift.

One nice thing about my Milwaukee is with one lever pull I can disengage the motor from the base, unplug it and then the motor is free. I put it up on my table for bit changes at a comfortable height. I haven't touched the actual power switch on the motor in years.

 

  • Author
On 1/11/2026 at 8:32 AM, Von said:

BTW, here is an in-depth review of the router (from 2003!) for anyone else who might be considering: http://nhwoodworker.com/triton/

My sense is that some engineer did the market research and talked to a bunch of woodworkers about all the features they'd want in their dream machine.  And then came up with a clever design that met all their wish list.  It's a beast of a machine, and has a really impressive design and features.

The problem is that imagining what you'd want is different than actually using it.  Like the safety interlock.  Also, what sells successfully is not necessarily the best design.  It was an innovative design from a relatively unknown company, and just never got traction on the international (read US) market.

I think I'll keep it around for when I need the power.  Like, using a router sled to flatten a slab with a large bit.  It would be great at that.  That review talked me into keeping it!

And there's always hope that Triton will get reorganized and parts will be available.   I assume there's no generic collet that will fit.

On 1/11/2026 at 9:34 AM, Tom King said:

I have one that someone gave me that I would be glad to give to someone else too.

If someone within driving distance of me offers one, I won't be able to resist!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.