Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Is the stock fence on SawStop CTS and PCS "sloppy"??

Featured Replies

Hi guys!

I have been researching options for upgrading my Ridgid R4512 TS largely because I am entirely unhappy with the fence on the Ridgid, so a quality fence is one of the most important things to me when considering a new saw. I would quite like to have a SawStop for the obvious safety feature, but I do think they will be above my budget, especially when I add some extras like a mobile base, etc. But if I can swing one, I'd like to have one.

I have a Woodcraft store about 30 minutes away, and I stopped there the other day just to see these saws in person, and indeed just from *looking* at them, they look like nicely built machines as most owners say. However, i tried sliding the stock fence on both the contractor and the pro cab saw, and maybe it's just me, but I was entirely unimpressed. I thought that it slid nicely and when locked down it *appeared* to pull square to the blade, but to me there felt like a lot of slop in the process. When unlocked, the fence would go quite far out of parallel. And to me, if you lined the marker guild up at let's say 12", when you locked the fence down it would move just a hair off that 12" mark on the guild tape. This was at least my experience/impression.

When I questioned it, the rather gruff employee proclaimed that this is how all fences work, even if a bought another brand, such as Laguna or even Powermatic, I was told. This doesn't seem right to me. The fence on my Ridgid doesn't stay parallel to the blade, but it doesn't have that kind of sloppy feel at all. The now 60+ year old Craftsman contractor saw that my father had and I used to use year ago did not feel sloppy like this. I've never been even near one, but I can not imagine that the fence on a Powermatic feels sloppy like what I experienced on the SawStop.

Is what I experienced typical with these fences, SawStop or anyone else? Is it possible that my local Woodcraft store just didn't have them setup well? Does SawStop's upgraded fence work any better?

I appreciate any help; than you in advance!

I have a PCS with the T-glide and know what you are talking about. My thought is that Sawstop and many others don't have a locking piece at the end of the fence, only where it clamps down. When I first noticed the movement, I just made sure that I was pulling the fence square to the rail before locking it down. It doesn't move at all when you do that. I had the same problem with a Delta contractor before that. It's now just a part of the routine, kind of like remembering to hit the power switch before you push the on button.

On 6/21/2026 at 4:42 PM, Beechwood Chip said:

I guess I've always done this automatically, without being aware of it.  

I normally do too, but noticed the movement when I would forget.

  • Popular Post

As someone who used to assemble a fair amount of floor model tools, i can tell you with confidence that there was more than a few where i didn't exactly fuss over every little setting. Especially if it was at the end of long list of things to be assembled. 

The T glide on Sawstop, and every other quality fence, is highly adjustable. So i wouldn't put too much stock into what you're seeing on the sales floor. You never know who assembled it and what kind of day they were having when they did it!

I have a SS with the T Glide and it's a very, very good fence. 

On 6/21/2026 at 3:16 PM, Ron Swanson Jr. said:

The T glide on Sawstop, and every other quality fence, is highly adjustable. So i wouldn't put too much stock into what you're seeing on the sales floor. You never know who assembled it and what kind of day they were having when they did it!

I have a SS with the T Glide and it's a very, very good fence. 

All of this. You just need to adjust it some.

  • Author

Hi guys! I'm so sorry, I am not getting notifications when I get replies here :-(

Thank you all for your help!

I agree that SawStop is never (typically) described as "sloppy" from what I've read, but the two fences I tried at my local Woodcraft store really left me scratching my head.

I'd like to think that the store didn't have everything setup as well as we would in our own shop. I also realize that you can kind of pull the fence back before locking down the handle, to straighten it up before locking it down. 

However, it sounds like many of you have the upgraded T-slide fence, so I'm not sure what to think of the stock fence.

You could give SS a vall.  I think they would talk to you honestly about their fence options.  Of course, if you bought a SS with the standard fence and couldn't make ot work for you, the T glide would always be an option.  

I ran a Biesemeyer Commercial fence for years.  The Saw Stop T-Glide is one of many "better than Bies" fences out there.  The basic form of the fence is the same but the adjustment capability, face replacement, and other details have been improved.  Being a t-square style fence it does have to release the rail enough to be easily slid into position. 

Although you can dial it in to a "minimal looseness" when unlocked there is really no advantage to that.  If you are looking for a movement similar to a full cable controlled system like a Paralock-2, that is what you would need to get.  The complexity of the Paralock does not outweigh the advantages for me (although it is super cool) BUT, I have run a DRO on my tablesaw since somewhere in the mid 2000s so any freedom of movement is pretty much irrelevant to me prior to lock down. 

  • Author
On 6/23/2026 at 10:49 AM, gee-dub said:

I ran a Biesemeyer Commercial fence for years.  The Saw Stop T-Glide is one of many "better than Bies" fences out there.  The basic form of the fence is the same but the adjustment capability, face replacement, and other details have been improved.  Being a t-square style fence it does have to release the rail enough to be easily slid into position. 

Although you can dial it in to a "minimal looseness" when unlocked there is really no advantage to that.  If you are looking for a movement similar to a full cable controlled system like a Paralock-2, that is what you would need to get.  The complexity of the Paralock does not outweigh the advantages for me (although it is super cool) BUT, I have run a DRO on my tablesaw since somewhere in the mid 2000s so any freedom of movement is pretty much irrelevant to me prior to lock down. 

Thanks for your help!

I honestly have no idea what a Paralock-2 fence system is :)

All I want is a well functioning fence that I can trust. I have not been around many higher-end table saws, and I am just trying to get a feel for is what I experienced at the Woodcraft store really how these fences work, which again was what the store employee told me. I do understand that to slide the fence it must release on the back side.

It does sound like the upgraded T-Glide fence is a great way to go, but now when I price up the SawStop cabinet saw with the T-Glide and a mobile base (that I have to have on any saw because my space is so small), I'm now looking at like a $4000 saw. That's not even including some type of blade guard dust collection that I'd really like to have, and forget about upgrading to a 3 hp motor. I can get all of that with a 2 hp motor in a Grizzly for about $2400, granted, without the big safety feature.

Their contractor saw with the T-Glide fence and mobile base is a much more affordable $2600 or so, but would not have anywhere near the dust collection capabilities of the cabinet saws, correct?

I obviously really appreciate the big safety feature of the SawStops, and I know that they are an excellent saw otherwise. But I fear they may be pricing me out. I'm a just a hobbyist right now, though I do aspire to some type of wood-based side-hustle, and I can't plunk down $4000 dollars on new table saw and expect to remain married :D

One thought I'm having is that I'm really kind of over my current Ridgid TS, at least the fence (otherwise I like it). I am thinking about getting just the $1000 entry-level Grizzly TS, which I have to think has a better fence than my Ridgid, and otherwise very similar specs (so no real gain in power, dust collection, rip capacity, etc.). As a hobbyist, this may be all the saw I ever need. If, on the other hand, I find a way to start making some money from woodworking, and believe that I'll be using my table saw much more frequently, then I could justify the cost of the SawStop. Does that make any sense at all?

Thanks everyone for your replies and help!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.