Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Wen Steel and Brass Miter Gauge

Featured Replies

  • Popular Post

I was in the market for a new miter gauge when i bought the Delta Unisaw a couple months back. I was searching for a gauge that would take the extruded aluminum fence that Incra sells as i bought a long fence for my 1000 miter gauge and now have a spare. I figured it'd be cheaper to buy the gauge with out a fence. Well Incra's option is the V27 and it's pretty much the same price as the 1000 maybe a bit cheaper but is still over $100. During my search i stumbled upon this Wen miter gauge. I've had good luck with Wen tools in the past, accepting that they are made over seas and cheaply.

After receiving the product i was pleasantly impressed. The miter gauge is well made, feels heavy and sturdy, and uses a lot of the same techniques Incra does. It could be considered a knock off i guess but it improves in a few places.

The Miter bar has the adjustment washers on 1 side. I like that. When Incra has them on both sides it causes me a bit of concern that they will wear hurting the accuracy of the gauge. With this design you have metal on one side and washer on the other. When the washer wears as long as you keep pressure against the metal side your accuracy should never change.

0703261501_HDR.thumb.jpg.88505f6ded3247ed11e5fe54de793db4.jpg

Second the tolerances feel tighter than my Incra gauges. I have the 1000 and 1000HD.

0703261500_HDR.thumb.jpg.9c9abe6549f1116bade4377d7dd95c35.jpg

Third the brass handle feels nice, looks nice, and has great knurling that gives good grip but doesn't feel sharp.

0703261501.thumb.jpg.1935794efc1a372ad57fa3b63cc4a857.jpg

I installed my 1000 incra fence, calibrated to my miter slot, set everything square to my table saw blade, and was off to the races. I cut a large portion of my hardwood flooring with it and it's accuracy was great. I tested 45s briefly and it seemed to check out ok. To ensure perfect 45s i use a different method shown before with 2 gauges in alternate miter slots and a machinist square.

  0703261508_HDR.thumb.jpg.185a1f9c838eb187b85149df71d563ae.jpg

Cons:

It doesn't come with the nice handled allen wrench for adjustment. And all the screws seem to be different sizes with different size allen heads. It does come with wrenches but they are your regular cheap  right angle wrenches.

I think the Incra indicator system is better if your trying to dial an angle that doesn't have a hard stop.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.