Recommended Posts

Posted
On 9/1/2026 at 6:50 AM, gee-dub said:

routerbitspeedchart.JPG.cebc700a7152d272d5ae1cd4d274d137.JPG

 

12 hours ago, wtnhighlander said:

3" diameter @ 24k rpm = 214.2 MPH

So even dialing back to 12k RPM the bit is still going a hundred miles an hour.  

  • Like 2
  • 3 weeks later...
Posted

Yes, generally the larger the router bit, the slower you want to run it. Small bits can usually be run at higher RPM, while larger diameter cutters need lower speeds because the cutting edge is traveling much faster at the same RPM. As a rough guide, I’d start around 18,000–20,000 RPM for small bits, 16,000–18,000 for medium bits, and around 12,000–16,000 for larger cutters, then adjust based on the manufacturer’s recommendations, the material, and how the cut sounds and feels. I wouldn’t rely on RPM alone though - feed rate and taking lighter passes make a big difference too.

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 56 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,008
    Total Members
    3,644
    Most Online
    Bob44
    Newest Member
    Bob44
    Joined