curlyoak Posted October 27 Report Posted October 27 https://www.walmart.com/ip/3Pcs-Tungsten-Carbide-Sanding-Discs-4-Angle-Grinder-Shaping-Wheel-Flat-Arc-Bevel-Grinding-Wheel-for-Woodworking-DIY/20306556041?wmlspartner=wlpa&selectedSellerId=102627014&adid=2222222222720306556041_102627014_199492704626_24219758109&wl0=&wl1=g&wl2=c&wl3=823751273895&wl4=pla-2449037643288&wl5=9012443&wl6=&wl7=&wl8=&wl9=pla&wl10=5484729126&wl11=online&wl12=20306556041_102627014&veh=sem&gad_source=1&gad_campaignid=24219758109&gbraid=0AAAAADmfBIqacN3tuAMXP1RajccoG-qtQ&gclid=EAIaIQobChMI0aaU5eHalwMV7QqtBh01RyhBEAQYCCABEgINtvD_BwE Any experienced thoughts or comments appreciated. I have 7 exterior doors that I need to remove the finish. What grit sandpaper for sanding ro after the very fine grinding disc. I have seen this advertised and never used it. Thanks Quote
Popular Post Tom King Posted October 27 Popular Post Report Posted October 27 I feel pretty sure those are going to be too aggressive and hard to take off exactly the amount you want. I would use a heat gun and scrapers. If they are to be painted, some kind of chemical stripper. 3 1 Quote
Popular Post Beechwood Chip Posted October 27 Popular Post Report Posted October 27 I've seen YouTubers use these for carving, eg seat bottoms. With practice, and very carefully. Not for a door, unless you start with an 8/4 door and want something sculptural and 3D. 3 1 Quote
Popular Post wtnhighlander Posted October 27 Popular Post Report Posted October 27 I use similar disks for power carving. Great for curves, terrible for flats. Way more aggressive than you are likely to need. Try 40 or 60 grit paper on a ROS or belt sander, if you are comfortable with hogging material away 3 1 Quote
Popular Post gee-dub Posted October 31 Popular Post Report Posted October 31 Agree with "too aggressive". I use something similar to make fake "live edge" items. For removing finishes and paints I find Citrastrip to be the least offensive to the operator and the most effective on the finish. Works pretty fast and is easily neutralized. Just my experience. Formby's and other high VOC chemical strippers work too but are incredibly strong. I tend to avoid them; I'm exposed to enough stuff already 2 1 Quote
Popular Post curlyoak Posted October 31 Author Popular Post Report Posted October 31 80 g ro is getting it done. along with scrapers. Due to the weight and the doors hang perfect, I will not remove the doors. Or the lock sets. I built the doors 25 plus years ago. I could lift them then. There are a few carvings that are on the doors and cant be sanded. If I can find some varnish remover. I need about a cup or less and all I can find is gallons at 50 or 60 bucks. The carver told me how the remover should be used. tricky but doable. I have low iron now. Keeps me tired. Hopefully resolvable. 3 weeks ago and 2 weeks ago I took 2 transfusions of iron. A very slow process. The doc says I will likely feel better by the end of November. That is when they want to test my blood. So I work only 1 hour a day. And that exhaust me. In time if the transfusion is working I should start feeling a little better. And resolved in a month. Not a guaranteed plan but I am optimistic. The one hour right now feels like 6 or 8 hours. Getting old sucks! 4 Quote
wtnhighlander Posted November 1 Report Posted November 1 Glad to sander is getting the job done. I feel (a little) of your pain at the low iron issue. Mine was nowhere near 'infusion required' - low, but the increased fatigue was noticable. You should start noticing improvement, soon. 1 Quote
Popular Post TomBexley Posted November 1 Popular Post Report Posted November 1 Since 80 grit and the scrapers are already getting it done, I'd stay with that rather than introduce an angle-grinder wheel halfway through the job. Those carbide wheels remove wood so fast that one little hesitation can leave a hollow you spend the rest of the day trying to blend out. For the carved areas, a small amount of stripper worked with a stiff nylon brush or a shaped scraper seems a lot safer than trying to sand the details. Once the finish is off, move up through the grits just enough to remove the 80-grit scratches. No reason to turn seven good doors into a woodworking experiment when the slower method is already working. 2 1 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.