Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Laguna DP/DX Drill Press

Featured Replies

  • Popular Post

Anyone on the form have any experience with the Laguna drill presses? Kev has one and really likes it and has provided some valuable insights but thought I would throw up a post to see if anyone else has experience or opinions? 

One question I have is they offer a 110 and 220 version any thoughts on why one would want/ need a 220V DP? Other than Voltage and HP they appear to be identical.

As I have mentioned I am getting ready to retire and my company is asking if I need any tools. They only thing I have never upgraded is my 30 year old Delta DP which is still going strong but if they want to buy me a new tool who am I to stop them :D

The 240V model would be advantageous if it was a long run to the panel. I have a 120V, 1.5HP DP and it has never lacked for power and has never tripped the breaker.

It's been a long time since my college electrical engineering power distribution class, but my recollection is basically high voltage means lower amps, which is advantageous as that means less load on the wiring, mainly in large-scale power distribution, and also, as drzaius points out, even over a long run in the shop.

Since higher voltage tends to mean commercial, I suspect they will often build in more power but that's not a direct result of the higher voltage.  (Perhaps easier to achieve with higher voltage?)

Three-phase has a similar benefit, if you get things tuned right (capacitance vs inductance), you can really cut the amps flowing over the transition line. You will find cases where capacitance or inductance has been added outside a building to help balance the load.

 

Is the motor the same size, or is the 220v larger? 

The only reason I can think of in WW is if you're running massive bits and like boring out logs or something. 

For furniture and the vast majority of what we do, 120v is plenty enough. 

  • Author

Thanks all! Pretty much in sync with my thinking just wanted to insure I wasn't missing something :)

  • Popular Post

As my EE buddy says "watts is watts".  Some folks put forward that 240v motors start up faster but there is so much more involved in motor design than just voltage, amps, and watts.  I ran a tablesaw that was 120v or 240v.  I ran it at 240v for years then I needed that outlet and didn't want to run a new one.  I converted it to 120v to free up the 240v outlet and never noticed a bit of difference.  JME. As you get to higher horsepowers 240v or even 3-phase start to make sense.

  • Popular Post
On 11/5/2026 at 3:39 PM, pkinneb said:

my company is asking if I need any tools.

How do we get jobs at this company!:)

@pkinneb, are you looking at a traditional drill press, or are you considering Laguna's new digital/electronic DP?  I have the Nova Voyager and I really like the electronic features, particularly the depth control.  I'm not sure how the two compare.

  • Popular Post

When it comes to driving large bits, I think the limiting factor for a drill press is not motor HP, but the capability of the chuck (and arbor).  With very large bits, like a 2 or 3 inch Forstner, the 1/2" chuck is maxed out, and barely able to grip the 1/2" shank of the bit, which then spins in the chuck. 

I swapped my OEM 1/2" chuck for a 5/8" from Jacobs (I went keyless,  too).  The chuck's grip is much improved, but now I have to be careful that the chuck doesn't slip on the arbor.  I still am happy I made the upgrade.

With large diameter holes I always start with a smaller bit  and work my way up to size in one or two steps. 

  • Author
On 11/7/2026 at 8:44 AM, Mark J said:

@pkinneb, are you looking at a traditional drill press, or are you considering Laguna's new digital/electronic DP?  I have the Nova Voyager and I really like the electronic features, particularly the depth control.  I'm not sure how the two compare.

Digital version.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

  • There are no registered users currently online

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.