FurniCore Posted Saturday at 10:25 AM Report Posted Saturday at 10:25 AM Hey everyone, I’m a custom cabinet maker who wanted a much faster way to lay out boxes, calculate edge banding deductions, and generate sheet nesting without dealing with heavy, overpriced desktop CAD software. Over the past few months, I’ve been developing FurniCore — a lightweight parametric 2D/3D CAD/CAM tool that runs directly in any browser with zero installation. Here is a quick 2-minute walkthrough of the full workflow from a blank screen to a production-ready cut-list: 0:00 — Setting up cabinet dimensions (supports both fractional inches and metric mm) & automated facade/drawer gap math 0:50 — Automatic edge banding thickness deduction & real-time 2D/3D sheet nesting (48x96" / 49x97" or metric sheets) 1:30 — 1-click PDF/CSV cut-list export & encrypted local project saving directly on your PC Since I built this around my own shop workflow, I’d really appreciate honest feedback from fellow woodworkers and shop owners here. What features or hardware standards do you rely on most in your daily builds? — Oleh Quote
Beechwood Chip Posted Saturday at 02:28 PM Report Posted Saturday at 02:28 PM I was just about to post something about Hew, but then I saw this and figured we might as well make it a thread. I've been using SketchUp for years, and I really like it's user interface, especially in the Windows version. It's pricey, and I wince every time my subscription renews, but I've tried several alternatives and decided to stick with it. But, I really really hate Windows and want to switch my desktop to Linux. The only reason I still use Windows is for Sketchup. Sketchup doesn't run on Linux, it doesn't run in Linux's Windows emulator, Wine, and it doesn't run on a virtual Windows machine. If you want to use Sketchup with Linux, the word on the street is to boot your machine into Windows to run SketchUp. So I got really excited when I heard about Hew, which is a free, open software 3D modelling app that is really really similar to SketchUp. And it runs on Windows, MacOS, and Linux! It also runs in your browser if you don't want to install the app. I started using it to see if it was good enough to switch (and finally let me ditch Windows and Microsoft). Good: So far, I like Hew. I could start using it immediately, and the only learning curve is that some of the tools are in a different place, but everything essentially works the same as SketchUp. BAD: Only two gotchas so far. The "flip" tool hasn't been implemented yet, and it doesn't have the "reports" feature that I once used to create a cut list for a complicated build. I don't care about reports, but I miss "flip". Hopefully they will implement it soon. I'm still using Hew, I'm way past the point where I usually give up in frustration and go back to SketchUp when trying new 3D modelling software. I'm a little uncomfortable about Hew copying all of SketchUp's interface design and market research effort. I don't use SketchUp because I admire the coding style, I use it for the interface, which is what Hew copied. It's legal, but ... 2 Quote
wtnhighlander Posted Sunday at 03:05 PM Report Posted Sunday at 03:05 PM There is another, named 'Sawhorse'. Still early in development, but has cutlist features built in, and supports plug-ins. One plugin, called cabinet generator, can create a basic cabinet / bookcase object from just a few parameters. Sawhorse is open-source and multi-platform. Sounds like an opportunity for @thewoodwhisperer to produce a 'Software Shootout' video! 2 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.