Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Mexican Style Wine Buffet

Featured Replies

The bottle cubbies came out a tad bit off and it kills me, but not having a table saw makes it difficult to get straight edges for tongue and groove cubbies like that. It came out pretty good though considering...

post-5536-0-18955300-1318035812_thumb.jp

post-5536-0-28158300-1318035817_thumb.jp

looks good you could cover up the gaps with a veneer or some kind of tiles or you could just ignore it.

That is a really nice job. It is a pity about the T&G's Maybe you could use a router table next time? It may be worth splicing a piece into the gaps at the front to disguise it. Just a suggestion. Looks great though.

while i was roofing a house i had a thought just take a chisel and open up the space a little bit and then fit in a decorative pieces of wood. then it will look like you intentionally did it. maybe put in a small piece of cherry wood or walnut to match you hinges

Put some expensive vino in the cubbies and a bit in you and the gaps will disappear.

i have gotten really really really good at hiding my mistakes :)

From the pictures, if you had said, "Where's my mistake?" I would have been hard pressed to find it.

Agree that you could add some edging to the boards and cover it up if you really wanted to, but unless the verticals rattle when you pull out a bottle, I'd say leave it alone. It gives it a bit of a timeworn look.

Love the proportions and the way you divided it up into sections.

I'd almost say that the stiles for the doors were too thick, but not really. Those hinges add the correct balance to it all and the placement of the handles is perfect.

I agree with Pickering...

But if you were looking for my input on how to hide the gaps, I'd say you might need to find some more brass similar to the existing hardware, and make some square stars, and fold the long points down to fit into the corner of the joints. It doesn't add stability, but it hides the gaps. The fear is that the brass square patches will dominate the piece, and you miss out on how wonderful it already is.

  • Author

Guys when I put this piece up, I was expecting to get some hard criticism by some seasoned wood workers, but I have been surprised by all of these awesome comments. Very much appreciated. Thanks everyone.

Patrick

" I was expecting to get some hard criticism by some seasoned wood workers, but I have been surprised by all of these awesome comments."

Fine, I'll attack. I think it's horrible. All that work and I don't see any wine in the cubbies. What's up with that?

But seriously , I would tack on matching strips of 1/8" - 1/4" wood on each horizontal. Match the color and use a pin nailer, you'll be the only one that knows.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.