Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Buying the wood for the bench

Featured Replies

Hi All

Looking for some advice on how to pick up the lumber for this project.

I was planning on using hard maple. The cost for 8/4 is $4.50 bf +$0.75 for boards over 8”. My first question is how is this compared to around your area?

Now focusing mostly on the top I’m guessing that I would need boards over 8” if I expect to get 2 planks out of each board. So my second question is how do you deal with this as most boards seem to be 10-12” wide? Do you just consider the extra waste?

My third question has to do on length of the boards. The lumber mill will cut boards shorter but in order to cut the boards you must leave at least 6’. I’m noticing most of the boards are 10’ to 14’. Now I know I can use some of the extra for other parts but I’m wondering if this is a standard lumber yard practice.

My last question would have to do with how much wood you purchase and what type?

I look forward to hearing how you made out getting your wood for this project.

Andy

Price of hard maple is similar here, give or take. I went with soft maple and paid $2.70/bf.

As far as getting the most out of your boards? Take your time thinking about which stick to use for what...and that's the best you can do. There's gonna be some waste, no way around it. Keep your scraps and make small projects out of it.

I wouldn't have the lumber yard cut anything down. I'd take it home, noodle on it for a day, then mill it myself.

Hi Andy,

Been meaning to catch up with you! I'm an hour or so up the road from you in Red Hook and (as I mentioned in another post) bought my lumber (8/4 Ash) from Condon's in Stormville. Did you get the quote from John @ Condon's? If not I'd recommend giving him a call and mention that I suggested you call. He was VERY helpful! I ended up paying $3.15/bf. Going back there later today to pick up 20 more bf as I don't want to be short.

Adam

usualy if you buy in larger quantities you can get a price cut look around at the local turning/wood working clubs. cabinet shops ect and do a group order. buy 50 bf rather then 5 and get some extra dollers out of it.

dont you want some give so the bench top dents and not the piece you working on? just not so soft that you end up denting it so bad you assemblies are way off.

  • Author

So I went for the hard maple after all. Placed the order today for ~150 bf and should be able to pick it up next week. At least this way I can look it over before I accept it.

Andy

Marc, is there going to be any sort of Bell Forest Products deal for the Roubo build?

They could package together the necessary amounts of 4/4, 8/4, and an appropriately sized chunk of 12/4 for the end cap.

Obviously shipping is an issue, but they seem to have pretty reasonable prices on maple, so combining that with a Guild discount could still result in a competitive price for the whole package, at least for some folks.

Hi All

Looking for some advice on how to pick up the lumber for this project.

I was planning on using hard maple. The cost for 8/4 is $4.50 bf +$0.75 for boards over 8”. My first question is how is this compared to around your area?

Now focusing mostly on the top I’m guessing that I would need boards over 8” if I expect to get 2 planks out of each board. So my second question is how do you deal with this as most boards seem to be 10-12” wide? Do you just consider the extra waste?

My third question has to do on length of the boards. The lumber mill will cut boards shorter but in order to cut the boards you must leave at least 6’. I’m noticing most of the boards are 10’ to 14’. Now I know I can use some of the extra for other parts but I’m wondering if this is a standard lumber yard practice.

My last question would have to do with how much wood you purchase and what type?

I look forward to hearing how you made out getting your wood for this project.

Andy

in the northeast I use j gibson mcilvain. Prices are as follows.

Soft Maple:

12/4=3.70

8/4=2.65

4/4= 2.35

Hard Maple:

12/4=5.95

8/4=3.85

4/4=3/15

Marc, is there going to be any sort of Bell Forest Products deal for the Roubo build?

I'm still not 100% sure if they are going to offer a kit. Frankly, I'm not a huge fan of the idea and not just because of the shipping costs. This is the kind of project that really burns through a lot of material. And while one person may be able to build their bench with 150 BF, another person may need 200 BF. So I highly recommend trying to source the stuff locally because you just might need to go back and get more. Also, I have some concerns about acclimation. Buying locally, you know the wood has been in your climate for at least a few weeks if not months.

And while all transactions are between the Guild members and Bell, I seem to get pulled in whenever there are problems. With this much wood, I am afraid the potential for "problems" is much higher. :)

  • 2 weeks later...

"in the northeast I use j gibson mcilvain."

Do they sell retail? What's their minimum order?

I'm in CT, and those are excellent prices, but I'm not a pro.

I do own a business, but if you don't just tell them you are a freelance woodworker. You can order from them, you just need to order at least 500 bf to get those prices. If you plan on doing more projects with this material, it is a great way to save some money. They deliver to NY twice a week so I get free shipping on orders over 500 bf. Check with themm to see if they offer the samefor CT. I can't see why they wouldn't. It is almost the same distance from them. They only have to go another 1/2 hour north on 95 and the same amount east as I am from 95. Here is there link and the Gentleman I deal with over there.

Ryan Wright

Sales

J. Gibson McIlvain Co

10701 Philadelphia Rd

P.O.Box 222

White Marsh MD 21162

United States

Ph: (800)638-9100

Fax: (410)335-6589

Mobile: (443)324-7732

Email: RWright@McIlvain.com

www.mcilvain.com

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.