Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Got the Tablesaw (finally), Now for the Blades

Featured Replies

Thanks again guys. I should be good with 10-2. The manual says the saw requires a 30 amp circuit. James, I'm good on the rip and dado blades and I have my heart set on the WW. Thanks anyway!

No Worries,

Good luck with the new saw! Grizzly makes some nice stuff.

James

8g is way overkill until you get to 7.5hp tools.

Yea, I know.. Only reason I stepped up the wire is because I was using it as a 30' cord; I didn't want too much line drop JUST in case the guy was a little shy on the 40a recommendation for the breaker.. Probably didn't need it, but made me feel a little better..

  • Author

Well, I got the #10 wire and the plug and hooked it all up today. It runs great! hhh, good point about the length of the wire. That thought crossed my mind but I decided to stick with the #10. I got 25' of wire. It seems to work fine...hopefully I don't see an issue if I really load the saw up with heavy material but we'll see!

Tommy,

Different question...did you get any discounts on the saw?

Tim

  • Author

Tim,

I didn't get any discounts. Did I miss something? I actually paid more than I had hoped because the prices jumped to the 2012 prices before I bought it. I also had planned on getting the WW 48T blade through Griz because it was on sale (I think it was around $120). By the time I placed my order, it wasn't on sale anymore. I asked if they could sell it to me for the sale price and they wouldn't do it. The regular price on the blade was more than I could get it elsewhere so I didn't get it. As for the saw, I had been looking at the 1023 RLWX for a couple years and I never saw it on sale. It must be a popular saw that they feel doesn't need to be on sale to sell many of them?? Who knows!

Tommy - The Infinity Super General and Freud Fusion are the two blades that had been trumping the original 40T Forrest WWII in several categories ....Forrest followed with the introduction of their 48T WWII to make it competitive in those categories. If the strengths of the 48T WWII are what you're looking for, I wouldn't hesitate to recommended the Super General (or the very similar Fusion), but I have more experience with the SG...it's the cleanest cutting general purpose or combo blade I've used to date. Both are typically in the $100 range.

If you'd prefer a bonafide bargain, the DeWalt DW7657 (made in the UK) or Delta 35-7657 (made in the US) can be found for < $30 shipped. The 7657 was a good value at $50. Another terrific bargain are the German made Onsrud blades on Ebay....auction style, free s/h, selling for as low as $14 shipped. Perhaps not quite at the level of a 40T WWII, but will be surprisingly close...you'll get good versatility and glue ready edges, which is really as good as it needs to be most of the time.

Tommy,

Knotscott is right about the Infinity Super General. I had one on my saw that I owned for a short period of time it seemed very nice. I no longer have the saw but am selling the saw blade for $65. Believe me this blade has not seen a ton of use. There is a little rust on the tips of the blade just from being in my garage but other than that its super sharp. Let me know if your interested.

James

Tommy,

Knotscott is right about the Infinity Super General. I had one on my saw that I owned for a short period of time it seemed very nice. I no longer have the saw but am selling the saw blade for $65. Believe me this blade has not seen a ton of use. There is a little rust on the tips of the blade just from being in my garage but other than that its super sharp. Let me know if your interested.

James

James,

You shouldnt have rust on the tips tungsten carbide has no iron. If it rusted it wouldnt be sharp either. Clean off what ever is on it but if its a true carbide blade only the plate should rust.

Don

  • 2 weeks later...

I would save your money and go with the 3 hp saw. You said it your self your not a production shop. with the money you save you could get a bunch of good blade or other shop stuff. I have a small production shop that pays the bills and i use a 3hp saw with full kerf blades and have no problem with any woods. jmho

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Who's Online (See full list)

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,012 Total Members
  • 3,644 Most Online
  • JAR Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.