Wayniackc Posted December 28, 2011 Report Posted December 28, 2011 Thought this was worth sharing. It's an AMA (ask me anything) with a guy that almost chopped the top of his hand off with a table saw. If you're not familar with Reddit, the top part of the post is his story, and then you can read through the comments below where he answers some questions from other posters. It's pretty interesting and a good reminder to never let your guard down (no pun intended). http://www.reddit.com/r/IAmA/comments/ns293/links_are_nsfw_graphic_images_iama_person_that/ DISCLAIMER: The post itself is safe for home/work (although there is probably some "colorful" language in the comments), but the pictures that you have to click the links to look are graphic images of a pretty horrific injury. So just be careful if that stuff bothers you or the people around you. Quote
Jfitz Posted December 28, 2011 Report Posted December 28, 2011 Oh my. That first pic of his hand is a real "Oh my dear God" moment. Those surgeons rock....looking at what they managed with that injury - all I can saw is wow. He seems to have a good outlook on life - good for him. Quote
Dave H Posted December 28, 2011 Report Posted December 28, 2011 I think I threw up in my mouth a little. Holy crap, what an ordeal! Quote
Wayniackc Posted December 28, 2011 Author Report Posted December 28, 2011 Yeah that hand surgeon did an amazing job. Quote
Boatworks Today Posted December 28, 2011 Report Posted December 28, 2011 When I was framing in my shop a few years ago, I was basically running on fumes for energy (between all the construction probably 16-18 hour days between "work" and building the shop for almost 3 months) so to say it lightly I was exhausted and not really thinking about what I was doing by the end of the day. I was using a pneumatic framing gun laying out the interior walls flat on the ground so I was on 1 knee nailing the top plates. Not thinking I used the gun to push myself up off the ground and had my finger on the trigger on rapid fire mode. Well, in less than a second 3 rounds fired off on concrete and I felt one of the nails graze my eyelash and leave a very slight cut on the crook of my right eye. After cleaning out my shorts and realizing what happened (specifically what COULD have happened) I noticed 3 big chunks of cement that were taken out by the nails in my brand new floor... I was by myself, no phone (lines had not been hooked up yet) and it was 2am... I would have been screwed.... I decided to leave those holes in the cement as a constant reminder of what can happen if you drop your guard for even a second, whether from rushing, exhaustion, etc.. I think the same would apply to these pics of the table saw incident. I'll be printing out one of the pics and posting it next to my saw as yet, another reminder. A lot of the tools we work with demand respect. If that respect isn't given, the tool will eventually take it.. Thanks for posting Quote
jimmykx250 Posted December 28, 2011 Report Posted December 28, 2011 Chilling read and pics to go with it. You really do have to be on your guard at all times in the shop.Good argument for a sawstop. Quote
Beechwood Chip Posted December 28, 2011 Report Posted December 28, 2011 I had almost the exact same accident: finished cut, turned off saw, paying attention to the work-piece in my right hand and my left hit the blade. In my case the blade had mostly spun down, and the way my hand hit the blade the injury was very minor. I had told myself and other people over and over, "watch the blade or the bit until it comes to a stop." I had been doing repetitive cuts and they were going smoothly and I was really cranking them out. Before that, I had heard that SawStop was going to come out with a contractor model for "about $1500", and I decided to buy it. When it actually came out, I went to check it out and the real price was $1700 + options. I decided not to get it, not because I couldn't afford it, but because I had gone in expecting to pay less than that. That was a month or two before the accident. Days after my accident I went out and got a SawStop. Quote
ChetlovesMer Posted December 28, 2011 Report Posted December 28, 2011 Holy Cow! Wow, those pics make an impact! Quote
bladerunner Posted December 29, 2011 Report Posted December 29, 2011 Wow this is rough. I was sitting in the emergency room at Shawnee Mission Hospital one night. We were waiting for help but I wasn't bleeding so we knew it was going to be a long night. Eventually, a guy walks up to the counter, all dusty, very 'out of it' with his hand wrapped in almost a two inch think ball of towels, and it had visible blood on it. The nurse asks him what happened and he said "I got it caught in a planer". OMG, I won't forget the look of this guy. I think I was the only person in the room that understood the implication. The nurse started asking him what a planer was and he was getting weak kneed. His family ran in about then and sat him down before he passed out. By this time somebody noticed he was losing it and got him in. When I got called finally by that nurse, I told her what a planer was and she understood what happened to his hand. I think this stuff happens more than we realize. Quote
Jfitz Posted December 29, 2011 Report Posted December 29, 2011 Good argument for a sawstop. I agree, but it is also a good argument for using a blade guard. Judging from his narrative, the saw did not have one, Quote
JimB1 Posted December 29, 2011 Report Posted December 29, 2011 I agree, but it is also a good argument for using a blade guard. Judging from his narrative, the saw did not have one, In most of these incidents existing guards and attention to what is being done could easily have prevented the issue. I have yet to see an incident where the blade shot out past the blade guard and attacked a person. It's always the person in motion and safety features disabled/bypassed or removed that caused the accident. The Sawstop blade break is a guard of last resort, it's made to be there if everything else fails and can minimize the damage caused by an inability of other safety features or processes to stop blade contact. I have that straight from the Sawstop rep. It may not cut your fingers off but folks still have had injuries requiring stitches even with the sawstop, that's better then losing a body part but still will ruin your day. Unfortunately too many folks seem to feel they are "safe" if they have the sawstop. There is a reason the sawstop still has a riving knife, blade guard and an emergency shutoff switch. The blade brake is there if you manage to get past all that with a body part and is a great feature but no one should think it is the end all be all or that you can't still get hurt on a sawstop saw... Familiarity breeds contempt as they say, no one should be that comfortable with any spinning blade IMHO... -Jim Quote
bois Posted December 30, 2011 Report Posted December 30, 2011 Familiarity can also work to your advantage though. I think a lot of table saw safety does come down to having a disciplined safety routine. Always wear hearing and eye safety. Always put the blade guard on for through rip cuts. Always unplug the machine when changing blades. And stay still until the blade has come to a complete stop. For me, these things have just become habits that I don't even think about. But perhaps the most important table saw safety tip I've adopted is to use it less. Unless the TS is the single best and safest operation for a routine, I'll look for alternatives. It's just the scariest tool I have in the shop, and I treat it as such. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.