baok Posted January 3, 2012 Report Posted January 3, 2012 I think I may have actually mastered the sharpening of my card scraper. I watched the William Ng video that was linked here (quite some time ago) over and over and then just did what he did. It works! Quote
CessnaPilotBarry Posted January 3, 2012 Report Posted January 3, 2012 Congratulations! The card scraper can save you a ton of time and money. Quote
duckkisser Posted January 4, 2012 Report Posted January 4, 2012 need to get myself a set of card scrapers so i can realy practice. Quote
baok Posted January 4, 2012 Author Report Posted January 4, 2012 Basically, my problem had been that I was overdoing everything. Too much pressure on the burnisher and too much pressure in use. And not refreshing the edge often enough. - will design rockets for food Quote
Jfitz Posted January 4, 2012 Report Posted January 4, 2012 That video also got me going on the road to using a card scraper! I won't say I've mastered it, but I have been able to make more and more use out of scrapers, thanks to that video. I recently need to scrape some old finish and then glue squeezout off a piece of oak - in the past I'd have used sandpaper (and cursed the whole time), but this time I used the scrapers and it was very easy. Quote
DerekG Posted January 4, 2012 Report Posted January 4, 2012 I love mine, anything that reduces my use of sandpaper makes me a happy camper. They DO NOT work on a lathe from what I can tell. They do however turn into flying stainless steel rectangles of death... Quote
nateswoodworks Posted January 5, 2012 Report Posted January 5, 2012 While I have been successfully using scrapers for a while the video you are talking about Greg did definitely help me too. I was overdoing it as well and when I tamed it back some my edges last longer which is always a good thing! Happy scraping. Quote
tdale51@yahoo.com Posted January 5, 2012 Report Posted January 5, 2012 I'm still the unhappy, sitting in the rain, fire extinguished, freezing my butt off, tent blown away in the storm camper But on the bright side I just got my first "real" scraper in the mail today ! So now I can throw away the useless piece of scrap stainless I WAS using and get started learning for real! I hope very soon to be able to be where you are. congrats! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.