Skip to content
View in the app

A better way to browse. Learn more.

Woodworking Forums & Project Advice | Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

thinking of buying this saw

Featured Replies

Its Tiawan not china. Generals are made in canada their HD saws are tawain and even use the same cast iron base as the PM2000 and 2700 painted green with the built in mobile base. The sawstop also comes from the same factory Chiu Ting Machinery Co Ltd. and uses many of the same parts as the griz, jet general and powermatic.

Don

What do you mean by their "HD" saws? Like you said, General Manufacturing is based in Canada and that is where the "General" line of tools is made. The "General International" line of tools is made in Taiwan. The "General" line is a better tool than the "GI".

What do you mean by their "HD" saws? Like you said, General Manufacturing is based in Canada and that is where the "General" line of tools is made. The "General International" line of tools is made in Taiwan. The "General" line is a better tool than the "GI".

I didnt realize there was a difference between the two, general and general international. All their commercial stuff is tawain except for one 14". All the sliders, jump, straight lines and cast iron base standards are tawain. The cast iron base ones side by side the PM2000 are almost the same saw. Their 14" is almost all tawain parts assembled in canada. All their machines are very close to PM and most of the parts are interchangeable even the ones "made" in canada.

I dont think it really matters what saw you buy anymore they are all so darn close that it doesnt matter , their just table saws.

Don

There's a significant difference between General and General International. GI is roughly comparable to Grizzly, Jet, Steel City, some of the newer imported Delta, some newer PM, etc. The Canadian made General stuff is really well made...old school style to last a lifetime, like old US made stuff, but with modern design updates. The General line uses the heavy duty Meehanite cast iron process, and they use American made motors. It's pretty convenient that they label their imports clearly....so many manufactures leave you guessing and doing your own research to find out. Look for the Canadian flag and the "General" logo....it's made in Canada. No flag and the "General International" logo means made in Taiwan...it's still pretty nice stuff, but not made to the level of the General line.

The safety device adds roughly somewhere near $1k to the price tag.

I'm not sure about that. As I recall, it was less than $500 to the price tag, assuming you believe the quality of the saw of course. I recall comparing the Sawstop PCS to the PM2000 myself - both right around $3k.

For me, investing in the technology was a no-brainer, really no matter the cost. I plan on having this saw for 10+ years (hopefully a lot longer) and also have young kids who really enjoy woodworking. Factor whatever the difference in cost and divide by the life of the tool and the few bucks / month in finger-insurance is a no-brainer.

Perhaps in the case of the PCS the safety device costs less...that's a relative bargain, but the contractor saw is ~ $1700 with a cheap aluminum fence and steel wings, which is considerably more than other saws with similar hardware. Some would argue that the PM2000 falls between the PCS and the ICS, but it gets really subjective...

They're all well made.

Knotscott, I think you have it right. My understanding is that the Sawstop brake system requires really beefy and precise trunions and motor mounts. So, the cost of adding it to a $3000 top of the line machine is small. I suspect that the Sawstop PCS has much beefier and precise trunions and motor mounts than other saws with a "cheap aluminum fence and steel wings."

Knotscott, I think you have it right. My understanding is that the Sawstop brake system requires really beefy and precise trunions and motor mounts. So, the cost of adding it to a $3000 top of the line machine is small. I suspect that the Sawstop PCS has much beefier and precise trunions and motor mounts than other saws with a "cheap aluminum fence and steel wings."

Through the years the top fuel dragsters have continued to increase in horsepower which means, they've had to continually come up with stronger transmissions, and larger, more hardened rear axles, and stronger wings that are still light, etc. etc. It's just a guess but I'm guessing that Stop Saws have also beefed everything up to handle what its designed to do. Having said that, it's probably like one of these 1950s table saws that weigh as much as a CAR....built to last.

Not so sure about the hd part. I think they are comming out with a tiny jobsite saw real soon. Their initial go round with ryobi wasnt going to add much of anything to the saw itself or cost.

You have a good point, dwacker. Sawstop hopes to develop a benchtop saw for under $1000. Assuming that it's comparable featurewise with the best benchtop saws on the market, and assuming that under $1000 means $990+, that's about $400 extra split between the sawstop technology itself, and general beefing up the motor and blade mounts. I'm predicting that it will be slightly over $1000 (at least at first), and it will be a lot heavier than other benchtop models.

I guess it makes sense that they've had a few years to figure out how to design a Sawstop saw that's not a behemoth. Early models are built strong and heavy, becauyse they are not sure how strong is strong enough. Later models can be strong enough.

Perhaps in the case of the PCS the safety device costs less...that's a relative bargain, but the contractor saw is ~ $1700 with a cheap aluminum fence and steel wings, which is considerably more than other saws with similar hardware. Some would argue that the PM2000 falls between the PCS and the ICS, but it gets really subjective...

They're all well made.

Right - I was comparing the PCS to the PM2000 - both cabinet saws around $3k. The Sawstop Contractor saw is way pricier than other contractor saws, that's for sure!

Coincidentally - I'm putting together that Sawstop Contractor Saw this week so I'll get to see just what it's like.

  • 1 month later...
  • Author

I'm getting more back on my tax's this year than I thought, so now I'll be getting the Delta Unisaw the saw of my dreams YAHOO! I can hardly wait I have to wire for 220, I hate cords running accross the floor it makes it a pain so I'm going to wire in a ceiling recepticle, and add a pull down cord(just love the pull down cords already have two 110's in my shop) I'm looking for a sorce for 220 pull down cords as Rockler who I got the 110's from doesn't carry them. Does anyone have a sorce for these? Dave

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,011 Total Members
  • 3,644 Most Online
  • bobtjanitor Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.