Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

thinking of buying this saw

Featured Replies

I'm thinking of buying this Grizzly cabinet saw http://www.grizzly.com/products/10-3HP-220V-Cabinet-Table-Saw-with-Long-Rails-Riving-Knife/G0691 my question would be about the width of dado cut the specs on the saw state it has a 13/16" capacity is that because the throat is too narrow or could you get more capacity by leaveing off the arbor washer? And also if anyone has this saw what are the pro's, and con's thanks for your replys. Dave

I have the G0690, same thing, shorter rails. I like it a lot. Very solid saw for the money. I didn't even know about the dado capacity, and I can't comment since I haven't yet needed to go bigger than 13/16. (But I have done 23/32 and it seemed there was plenty room left over, FWIW).

13/16 is average. Dont leave the washer off. You will need a decent throat plate for your dado.

Don

Like Don said, don't leave the washer off. It's there to aid in the clamping force of the nut. Generally as long as you can get 1 thread past the end of the nut+washer you're set. Typically it's not the throat that you'll run into issues with it's the length of the arbor.

Can't give you any feed back on the saw. I did buy it's counterpart G1023RLX to replace my old G1023R. I looked at both saws (1023 & 690) and decided to stay with the 1023 due to my history with it as well as the extra 2" rip capacity to the right of the blade and 7/8" dado capacity.

Matt

+1 on what Don said.. It usually has to do with arbor length. You have to ask yourself, "Self, are you really going to ever cut a dado more than 3/4"? ANd if I do need to, cant I do it in two passes or so?" I have the same capacity on my General, and I have never gone bigger than that. When I was making lap joints, I was fine making multiple passes. Just set the first cut to the to be the final length of whatever you are doing and then nibble off the rest. Works great.

Gotta disagree a bit about the washer...sure it's better to leave the washer on if you can but there are several reputable manufacturers who suggest that it's ok to leave the washer off as long as the nut gets fully seated on the threads. DeWalt, Infinity, Freud, etc. It's a fairly common, and presumably safe practice.

I read that somewhere about being OK to leave the washer off - can't recall if it was on the packaging for my Dado set or where. Would love to hear sources of good/bad practice?

It will destroy your blade. Nut is harder than the blade.

Don

Isn't the arbor the same hardness as the nut? All spin in unison at the same rpm, so it really shouldn't be an issue.

As for throat plates, they're easily made. Use your existing plate as a pattern for a router and pattern bit. Stick the plate to appropriately thick plywood with carpet tape, rough cut with a band or jig saw, finish with the router. While the router is out, make a stack of them. I keep zero clearance dado plates handy for 1/4, 3/8, 1/2, 5/8, and 3/4. Keep the uncut plates handy until you need them.

While common knowledge suggests you should always use an arbor washer, the manual for my SawStop Industrial Cabinet saw, on page 18, specifically says to NOT use the arbor washer on dado stacks thicker than 3/8".

BTW... SawStop puts out one of the very best machine manuals I've ever seen. Give it an online "flip through" and see for yourself.

I use an arbor washer no matter what. It keeps the nut from scarring the blade when you tighten or if the blade should rotate any during the cut (yea I know..."it wasn't tight enough to start with) but even a 32nd of movement and the blade is scarred. Larger arbor washer in my mind gives greather stability to the blade so if the arbor is about full, just use a fender washer.

  • Author

Thanks for all the feed back, I presently have a ridgid table saw I've had it for about 15 yrs and when I use a thick dado stack I always run the saw without the arbor washer, I guess I've noticed maybe a little scaring on the outside dado cutter but nothing to get in a twist about. My question was more to do with weather I could get max cutting width out of my dado set without the arbor washer. 13/16 will probly work for most operations, some of the other grizzly saws claimed to have 1" as max dado width, but than they are alot more expensive. Anyway thanks all. Dave

Isn't the arbor the same hardness as the nut? All spin in unison at the same rpm, so it really shouldn't be an issue.

No Just as Timwood stated above. The blade especially a dado blade will snug itself. The reason why right tilt saws use left hand threads. The nut will chew into the blade.

Don

I'm wondering if a nut is not a nut and might not be a similar nut... :blink:

I mentioned that SawStop recommends against the nut as the stack reaches a certain thickness. The SawStop arbor nut is different from what I've seen on other cabinet saws. One side is extremely smooth, with a distinct rounded profile, almost like a lug nut.

My General 650 had an arbor nut that looked like a typical hardware store nut, identical on both sides, with rough edges.

I'm wondering if a nut is not a nut and might not be a similar nut... :blink:

I mentioned that SawStop recommends against the nut as the stack reaches a certain thickness. The SawStop arbor nut is different from what I've seen on other cabinet saws. One side is extremely smooth, with a distinct rounded profile, almost like a lug nut.

My General 650 had an arbor nut that looked like a typical hardware store nut, identical on both sides, with rough edges.

I think what you discribe is probably like my PM2000. Its sort of an oddball nut, the blade side is different. My guess is the factory is now just using a different nut. They all come out of the same factory. My old jet cabinet saw had a more "regular" nut like your general.

Don

I have the saw you're looking at, there's plenty of room on the arbor with the nut for the full stack if that's the concern.

I think what you discribe is probably like my PM2000. Its sort of an oddball nut, the blade side is different. My guess is the factory is now just using a different nut. They all come out of the same factory.

Many cabinet saws may come from the same Chinese factory, but the General was built in Dummondville, Quebec, Canada, not China. I can't state General's arbor washer instruction, as the manual was pretty lacking.

The SawStop ICS is a very different animal than typical cabinet saws so it's at least from a different assembly line...

Many cabinet saws may come from the same Chinese factory, but the General was built in Dummondville, Quebec, Canada, not China. I can't state General's arbor washer instruction, as the manual was pretty lacking.

The SawStop ICS is a very different animal than typical cabinet saws so it's at least from a different assembly line...

I made my first pilgrimage to a Woodcraft Store 2 weeks ago. It was great to say the least. I talked to the guys about the (as someone's wife put it) "Stop Saw"....ain't that cute???....Woodcraft Phil was telling me that not only does the Stop Saw activate the mechanism and stop the blade but it doesn't drop straight down...it retracts or rotates down and AWAYfrom the operator....it goes down and simuntaneously backs away from the operator. In all of the conversations and YouTube videos, I've not heard that before. That is neat....I guess it's true??? Not to derail the thread but I just thought that was interesting and since the Stop Saw seems to have a nut and (it seems) arbor washer built together, you're probably ok.....and Barry...better bring the Cessna a little lower..."nut is a nut is a nut''...sounds like the air is a little thin up there! :wacko::)

Many cabinet saws may come from the same Chinese factory, but the General was built in Dummondville, Quebec, Canada, not China. I can't state General's arbor washer instruction, as the manual was pretty lacking.

The SawStop ICS is a very different animal than typical cabinet saws so it's at least from a different assembly line...

Its Tiawan not china. Generals are made in canada their HD saws are tawain and even use the same cast iron base as the PM2000 and 2700 painted green with the built in mobile base. The sawstop also comes from the same factory Chiu Ting Machinery Co Ltd. and uses many of the same parts as the griz, jet general and powermatic.

Don

Tim,

The SS ICS mechanism is very different, as you raise and lower the blade in normal operation, the arbor stays in the same vertical plane, as the trunnion moves up and down a post.

Most, if not all, cabinet saws have mechanisms that move the arbor (and motor) in a slight arc as it's raised and lowered, using a horizontal pivot parallel with the front of the cabinet.

The wheels started turning about replacing my saw after I used three SS ICS examples in a local woodworking school. At the time, I was investigating retrofitting my 1999 650 to a 650R, to add a real riving knife.

Take a look at the exploded view in the SS ICS manual, and compare it to any other cabinet saw's exploded view. Once I started doing research, the more I looked, the more differences I saw. No pun intended... :lol:

The mechanism movement is different, the cabinet layout is different (two doors!), the switches (service, master, and feed) are different, the dust collection is different, the industrial base is different, the table size and tableboard are different... and it stops spinning if all goes wrong!

I honestly can't see major functional differences between PM, General, Jet, the older Uni's, and Grizzly cabinet saws. I've personally used every one of them. Minor details, yes... In reality, the 10" cabinet saw has been pretty much the same for 50-60 years. Only the new Unisaw and SS have really included major redesign.

I have the G0690 and I had a 7/8 dado on the unit with spacer a couple of days ago. Still had threads showing. Probably just conservative ratings. The factory dado plate is inch and a quarter wide.

Could always make two passes.

is saw stop worth the money?

That's a matter of opinion.

There are several different variations that you can buy from Saw Stop, from a contractor saw with steel wings and aluminum fence to an industrial grade cabinet saw...whether or not they're worth the money really boils down to how we each view the value of the safety mechanism, how we view the value of the saws themselves, our opinion of the company, and how affordable they are to us. The safety device adds roughly somewhere near $1k to the price tag.

...

I honestly can't see major functional differences between PM, General, Jet, the older Uni's, and Grizzly cabinet saws. I've personally used every one of them. Minor details, yes... In reality, the 10" cabinet saw has been pretty much the same for 50-60 years. Only the new Unisaw and SS have really included major redesign.

The new Grizzly G1023RL also has a new design. Others that have been designed from the ground up to accept a riving knife would likely have new designs too. Others, like the G0690 and Laguna are just factory retrofits of the original designs with a riving knife added.

g1023rl_det1.jpg

G0690 (same as the Laguna Platinum AFAIK):

g0690trunnions.jpg

The original G1023 (based on the original Unisaw design):

g1023s_trunnion.jpg

is saw stop worth the money?

Only you can and should decide.

In my case, I wanted to update to a saw with a riving knife. After using several examples, I was very happy with the build quality of the saw. I also liked other features, like the operation and rolling ease of the industrial hydraulic mobile base, the effective dust collection, the size of the table, the size of the insert opening, the ease of removing the riving knife, the dust collection, the disconnect switch, the included zero clearance insert, the build quality of the table board, and the overall glass smooth operation of the machine.

As far as the stop technology,... I see it as well proven and worth having.

In 3-4 years, the three machines at Connecticut Valley School of Woodworking, have fired twice. One was a triggered by a student's hand, the other was by an aluminum miter guage. I live near Wesleyan University, where a SS saved a hand in their maintenance shop.

I work alone, and see myself as well trained, experienced, and safe. I have never had a table saw accident, other than one minor kickback. At the time, I using the fence as a stop block without a standoff, 20 years ago as a newbie. I love my hands, and use them every day... In my eyes, I absolutely felt that spending the extra money for the stop technology was worth it.

All that said, I pass no judgement on anyone else's choice of saw.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,010 Total Members
  • 3,644 Most Online
  • Lolli4 Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.