Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

dining room table

Featured Replies

I recently stained our pine (I think) dining room table with Minwax, oil based stain in walnut. I want to seal the table but don't want a plastic-look to it, so I'm not going to use polyurethane. Some suggest I use tung oil but I'm afraid it won't be enough of a sealant for a table which will get used every day. I'm looking for suggestions. Any help most appreciated.

Thank you in advance!

Word, if you use a wipe-on poly, satin gloss, it should look great. High gloss does look plastic, but has the added bonus of showing every single speck, fingerprint, defect, etc.

Your choices are protect the wood and stain by using a film forming finish which may look plastic but is fairly easy to maintain, or using an oil type finish with constant maintanence (which is not hard to do,just frequent)

A happy middle ground might be to use poly or something similar and then rub out the finish to a satin or duller sheen thus reducing the plastic appearance.

Good advice above. Protecting the wood implies some sort of film finish. There are different finishes you should look into, but even "poly" comes in different types from different manufacturers, each with different appearances.

I suggest taking a look at Marc's video on this topic

http://www.thewoodwhisperer.com/videos/oil-based-finish-basics/?category_name=finishing

Your choices are protect the wood and stain by using a film forming finish which may look plastic but is fairly easy to maintain, or using an oil type finish with constant maintanence (which is not hard to do,just frequent)

A happy middle ground might be to use poly or something similar and then rub out the finish to a satin or duller sheen thus reducing the plastic appearance.

Excellent advice! :)

  • Author

Thank you all very much. I think I'd rather have some ongoing maintenance than a poly finish. It's just not the look we want. A friend suggested tung oil and I think that's the way I'll go. I really appreciate your taking the time to reply.

REAL tung oil is very difficult to find and work with. What is labeled "Tung oil" in the stores contains nothing of the sort. Neither is really what you want to use. I wouldn't recommend using an oil/varnish blend on a kitchen table top. It's not possible to build the finish with an oil varnish. It will just start to gum up on you. On a kitchen table, you do want to build a good film on the top.

As mentioned above, I would get a satin poly and thin it down with mineral spirits. The "Wipe on Poly" tends to be a lot more expensive and is really nothing more than regular old poly thinned with Mineral Spirits. If you thin it yourself, you can play with the mixture and get the desired build for each coat. Wipe on several coats. If it is still too glossy, you can knock it down with some #0000 steel wool.

Use Briwax clear. It's a great product and makes for a beautiful high-end finish. It's a bit labor intensive, but well worth the work. Rub on a thin coat, let it dry overnight, rub it with 0000 steel wool and buff with a high speed brush you can get from Briwax. Put on another thin coat and repeat for as many coats as to like.

Sherwin Williams has a moisture resistant lacquer that looks really nice you and get it in the dull rubbed effect...the only thing is you have to spray it.

I made a pine harvest table a few years back, and stained it walnut. I used wipe on satin poly and it turned out great. I put on five coats of poly, and then a coat of paste wax.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.