dodgeram99 Posted October 24, 2012 Report Posted October 24, 2012 I just bought the Festool CT 48 dust extractor. Im trying to figure out what I need to make the hose fit all the non- festool tools I have. Any sugestions. Thanks Quote
JerrySats Posted October 25, 2012 Report Posted October 25, 2012 Doesn't the 27MM hose end fit most of your tools ? Quote
dodgeram99 Posted October 25, 2012 Author Report Posted October 25, 2012 It fits all the festool tools, I have like a glove. I'm trying to use it on a ridgid sander and a dewalt router. Quote
dodgeram99 Posted October 25, 2012 Author Report Posted October 25, 2012 the dust extractor and the ridgid sander. Quote
Eric. Posted October 25, 2012 Report Posted October 25, 2012 The box stores sell a number of different sized rubber couplers with the hose clamps on each end. I've got the opposite problem you have...Festools with no Festool extractor...yet, and they've come in handy for temporary solutions a number of times. Quote
pghmyn Posted October 25, 2012 Report Posted October 25, 2012 Blue tape.... do it... Just plain yellow masking tape is what I use. Few go arounds and I'm set to go. Or, you could make a coupler out of wood Quote
Joraft Posted October 25, 2012 Report Posted October 25, 2012 Will this help? Festool Hose Sleeve Quote
Trip Posted October 25, 2012 Report Posted October 25, 2012 fein makes a pretty universal adapter. it's kind of a step-ring affair and works pretty well. FT makes a funnel-like adapter, but it doesn't work nearly as well. Quote
jsiard Posted October 25, 2012 Report Posted October 25, 2012 The box stores sell a number of different sized rubber couplers with the hose clamps on each end. I've got the opposite problem you have...Festools with no Festool extractor...yet, and they've come in handy for temporary solutions a number of times. You'll find fernco couplers in the plumbing section at HD, inexpensive and easily manipulated to fit most standard and metric sizes. Quote
BuilderBill Posted October 26, 2012 Report Posted October 26, 2012 fein makes a pretty universal adapter. it's kind of a step-ring affair and works pretty well. FT makes a funnel-like adapter, but it doesn't work nearly as well. +1 for the Fein Step Adaptor. It fits over the end of the Festool 27mm hose and you can carve it up to fit almost anything. Order a bunch. Trust me... HTH, Bill Quote
b33tl3 Posted October 28, 2012 Report Posted October 28, 2012 For most of my tools I use the hose from my old ridgid shop vac. It will work if your tools have 2.5" ports or adapters. Quote
Trip Posted October 28, 2012 Report Posted October 28, 2012 ==> Festool CT 48 got to ask -- that thing's a beast. What do you use it for? Quote
dodgeram99 Posted November 3, 2012 Author Report Posted November 3, 2012 It superb. I use it for every thing. I use a chip collector with it. Besides all my festool tools. I use it for attaching to the jointer planer table saw. Router table. I don'tc even use my shop vac any more. What a wast if 119$. If you don't have a festool dust extractor. Get this o e. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.