dodgeram99 Posted October 29, 2012 Report Posted October 29, 2012 I'm looking for a benchtop hollow chisel mortiser. Any suggestions? I have looked at the Powermatic, Delta and a few others. Quote
Len Posted October 29, 2012 Report Posted October 29, 2012 I have the Powermatic. At first I was not impressed UNTIL I bought a good set of chisels. Now all is well. I suspect you will be happy with any of the higher end mortisers. Just don't go cheap on the chisels. Quote
jimbofoxman Posted October 29, 2012 Report Posted October 29, 2012 I have the Delta, like Len at first I wasn't impressed. That was until I sharpened them, both the chisel bits and the drill bits. After that I didn't have an issue. Now I haven't used it a whole lot yet. But I like the Delta. Quote
Jfitz Posted October 29, 2012 Report Posted October 29, 2012 I have the Steel City, which for all practical purposes is identical to the Delta. I have not used it a lot - the project for which I bought it keeps getting postponed - but I have used it some and it seems to work well. Definitely tune up the chisels and bits. I did a test "out of the box" and then after having sharpened the chisels and It made a world of difference. There are a lot of reviews online if you search for "bench top mortisers reviews". Some might be outdated as far as current product but they should have some good information on what to look for. Quote
rodger. Posted October 29, 2012 Report Posted October 29, 2012 I have the delta as well and am very happy with it. It got great reviews in FWW a few years back. Quote
dodgeram99 Posted October 30, 2012 Author Report Posted October 30, 2012 Thanks guys. This will help alot. Quote
kep1019 Posted October 30, 2012 Report Posted October 30, 2012 I'll throw a wrench in this, I have one from harbor frieght and have been pleased with it. I bought mine for building a arts and crafts loft bed with at least 100 mortises. Have used it for a few projects after that. If I was going to use it everyday I would definitely look at the higher end ones with substantial work piece clamping, but for my limited hobby use it works just fine. I did need to add a board to the fence but other that that made no major modifications. I have mortised qtr sawn oak, hard maple and cherry with it. Quote
AndyF Posted October 30, 2012 Report Posted October 30, 2012 I have a Shop Fox, and I'm pretty happy with it. I used it for building a mission style cherry cradle. I need to sharpen the chisels, and there are some inefficiencies and quirks with adjusting the fence and holding the workpiece, but I suppose that's true for all benchtop mortisers. I keep leaving only the gas strut holding it up, and now it needs to be replaced. Quote
Joraft Posted October 30, 2012 Report Posted October 30, 2012 I have a General International Model 75-075. It has a 1 hp. motor, and a chisel capacity of 1/4" - 1". Over all, it's a well built machine that I can recommend. Quote
CubsFan Posted October 30, 2012 Report Posted October 30, 2012 So, in addition to this, what chisels does everyone have? Quote
Eric. Posted October 30, 2012 Report Posted October 30, 2012 I'll throw in another wrench...how 'bout a Domino instead? Quote
pghmyn Posted October 30, 2012 Report Posted October 30, 2012 I'll throw in another wrench...how 'bout a Domino instead? I was reading this as thought, "I thought someone would have suggested that by now " Quote
Joraft Posted October 30, 2012 Report Posted October 30, 2012 I'll throw in another wrench...how 'bout a Domino instead? Instead? Why not as well? Quote
rodger. Posted October 30, 2012 Report Posted October 30, 2012 The Leigh FMT is also worth a hard look. Quote
Rick LoDico Posted October 31, 2012 Report Posted October 31, 2012 The Austrian-made Delta chisels are excellent. 40-45.00 each. There are cheaper Delta chisels that are not Austrian-made and not as good. I hear Clico are the best but pricey. Quote
Joraft Posted October 31, 2012 Report Posted October 31, 2012 ... I hear Clico are the best but pricey. I'll say! Over $100 each! But they're hand made in Sheffield, England, are longer than average, and are supposed to make extremely clean cuts. Quote
Rick LoDico Posted October 31, 2012 Report Posted October 31, 2012 I'll say! Over $100 each! But they're hand made in Sheffield, England, are longer than average, and are supposed to make extremely clean cuts. Long, yes. Too long for my Delta mortiser without cutting it about 1/2" shorter. Quote
Jfitz Posted November 2, 2012 Report Posted November 2, 2012 The May 2012 issue of Wood Magazine had a benchtop chisel review- this is more recent than the review I recalled in my other post. In this article, the PM 701PM took home 'Top Tool' ($480 without chisels/bits), and the Grizzly G0645 took home "Top Value" ($245, inc 4 chisels/bits). Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.