Recommended Posts

Posted

If you have read some of my previous posts, you probably know that I have a few ridgid brand tools (TS, planer, a bunch of corded tools). One of the big selling features of ridgid is their life time sergive agreement (or LSA).

The other day I logged into the ridgid warranty program to check on my tools. Ridgid has updated the software program that deals with warranty items.

After I logged in, I was very surprsied that Ridgid tools have "downgraded" most of my tools from their Life Time Service Agreement status to 3 year status (some from 2006), so now the warranty is long expired.

I contacted customer service, and they basically told me "tough luck". The customer service Rep told me to go find my reciepts and send them in again, and then a warranty officer would "consider" my application and may "award" me the LSA in 12 weeks if he sees fit.

10 or 11 emails later, I am no further ahead. They will not discuss the matter on the phone, and only refer to the online communication tool. I was on hold the other day for 24 minutes.

So I am going to take the advice of a member of the ridgid forum and "vote with my dollars". I have purchased my last Ridgid tool.

Posted

I don't know why they can't or won't straighten it out for you, I have 11 tools dating back to July of 2007 all still showing LSA all but 4 of them were purchased at half off or better close out. That being said I always expected them to come up with a reason not to honor it. Thanks for the heads up, it never hurts to check to make sure nothing's changed. I'm not sure I will buy anymore of their tools either but due more to the quality of their tools seems to have dropped somewhat in my opinion.

Pat

Posted

When I registered my LSAs, I received an email and also something in the mail confirming it. If you have those it might help.

And yes, I keep all kinds of paperwork on everything. I still have the operator's manual for the cassette player I bought in 1975, and pretty much everything I have bought since if it still works

Posted

This is a pretty big deal if they've reneged on their LSA.

i agree completely. i own a few ridgid tools and have been pleased with their quality/price ratio, but this could be a deal breaker for any future purchases.

Posted

Yeah it's complete BS that they're going back on their word. Complete BS. But on the other hand it's no surprise. The lifetime warranty basically assures that they'll never have repeat customers for the same tool. If I bought a Ridgid table saw and it lasted me ten years, I'd be plenty satisfied with that and would go back to buy a replacement if I didn't want to upgrade. But with the LSA, I wouldn't have to. They'd have to fix my old one or send me a new one. I'm no economist, but that doesn't sound like a sustainable business model to me. I think a three year warranty is more than fair, although I mostly see one year on the tools I usually buy...which I think is a little short.

Someone should call Ralph Nader. Sounds like a consumer advocacy case to me. You can't just promise something to make a bunch of sales then reneg on that promise.

Glad I only own one of their shop vacs and a brad nailer. I'll never consider their tools again.

Posted

My experience with the Ridgid Limited Lifetime Service Agreement has been just the opposite of the OP's. I've never had any issues getting any my tools properly registered into the program or maintaining that status. When the software was updated a few years ago there were some problems with some tools not making the transition properly and some tools did crossover from LLSA to just 3 Year Warranty. IIRC, that issue was brought up at the time on the Ridgid Forum and anyone with problems was instructed to call Ridgid Customer Service to get the matter straightened around. Now I understand that not everyone who owns Ridgid tools hangs out at the Ridgid Forum so some owners might not have been aware that there was even a problem when they changed software but I don't believe Ridgid has reneged on the LLSA. Because computers are famous for causing massive SNAFU's I always keep an updated printout, from the Ridgid website, of all of the items registered into the LLSA which shows their status, model # and serial #. Their computers could totally crash and I still will have proof that my tools are covered under that Program.

Posted

My experience with the Ridgid Limited Lifetime Service Agreement has been just the opposite of the OP's. I've never had any issues getting any my tools properly registered into the program or maintaining that status. When the software was updated a few years ago there were some problems with some tools not making the transition properly and some tools did crossover from LLSA to just 3 Year Warranty. IIRC, that issue was brought up at the time on the Ridgid Forum and anyone with problems was instructed to call Ridgid Customer Service to get the matter straightened around. Now I understand that not everyone who owns Ridgid tools hangs out at the Ridgid Forum so some owners might not have been aware that there was even a problem when they changed software but I don't believe Ridgid has reneged on the LLSA. Because computers are famous for causing massive SNAFU's I always keep an updated printout, from the Ridgid website, of all of the items registered into the LLSA which shows their status, model # and serial #. Their computers could totally crash and I still will have proof that my tools are covered under that Program.

I did call, and was put on hold for 24 minutes. Then I was transfered to a machine to leave a message. No return call. I have been messaging back and forth with the customer service dept regarding the issue, but they simply copy and paste their previous reply.

I have been a member of the ridgid forum board since 2006, and the moderator (josh) is trying to get the thread into the right people. We'll wait and see what happens I guess.

I was a big fan of ridgid until lately. I feel very let down by them. If it was an honest mistake, I get that, no problem. But why give a loyal customer the run-around? I don't even need machine service. I just want my tools registered properly, they way they were a few weeks ago.

Posted

I wasn't aware that there was a recent issue with the Ridgid website just the one from a couple of years ago. If yours is an isolated incident than I totally agree that you should be upset and hopefully this issue will get quickly straightened out to your satisfaction. Your comments made me check the status on my tools and all are, as they should be, listed as being in the LSA Program.

Posted

That is something. I understand economics (as eric explained), but I'm surprised they at least didn't grandfather in old tools to avoid controversy and simply carried the 3 year warranty on new tools going forward.

Posted

I can't speak specifically about Rigid, but there are two major issues with LSAs that most consumers don't understand.

The first is that "Lifetime" is defined differently for each LSA. Most consumers assume that means their personal lifetime. In many cases it mean the "useful life" of a product. "Useful life" being an accounting term to generalize the average lifespan of something (in this case equipment). For example, the useful life of a hammer may be 10 years. But anyone who has owned a hammer can tell you, short of badly mis-using a hammer it will last 50+ years. However, statistics show, on average they last about 10. Then they are lost, broken or just discarded.

The second major black eye for consumers is that LSAs don't necessarily move with a brand when there are mergers and acquisitions. Terms of a buyout can include that the purchasing company gets to re-write the LSA for future sales and the previous owner is responsible for prior sales (or a one time reserve is built). The catch here is that the previous owner has little vested interest in maintaining the expense only end of a business he/she no longer owns. It's more economical to cash the check and shut it down. There is risk to the buying company as that obviously has brand reputation impact. That said, they get to pay folks like me to determine if that shot to the brand reputation is better or worse than the expense to honor the prior owner's agreements.

LSAs are Cashflow killers, so most companies will wiggle lose of them when they can. Even if you make a flawless product you have to reserve for the liability of future claims. This is no good for current cashflow, and cashflow is king.

  • Like 1
Posted

I have called Ridgid about this issue. Patty who was very nice said that the life time warranty is still good . As long as you register all your tools the way they suggest. I did find this out, the warranty is only good if you bye tools from Homedepot. If you bye them from any place else you only get a 3 year warranty.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 57 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined