JohnDi Posted January 19, 2013 Report Posted January 19, 2013 Has anyone ever used a craftsman moulding cutter on their table saw ? A friend gave me one and I'd like to try it, but it seems awfully heavy and I don't want to ruin my table Saw. It's a cutter head with removable cutters in different profiles. Quote
robjeffking Posted January 20, 2013 Report Posted January 20, 2013 post a pic Id like to see it Quote
JohnDi Posted January 20, 2013 Author Report Posted January 20, 2013 Best pic I could get with iPad Quote
duckkisser Posted January 20, 2013 Report Posted January 20, 2013 im guessing it works similar to a dado stack but sorry no real help never touched one let alont tried one. Quote
dwacker Posted January 20, 2013 Report Posted January 20, 2013 It just a cheap version of the magic moulder. Dont use unless you have a good full sized cabinet saw. Don Quote
Alan Bienlein Posted January 20, 2013 Report Posted January 20, 2013 I grew up using them on my fathers craftsman contractors table saw and when I set up my own shop bought one for my craftsman contractors table saw. I used the three bead cutter on my daughters crib I made and the ogee cutter on our dresser and night stands for the edge detail on the tops and the drawer fronts. It did a very nice job with little sanding. Make sure the cutters are seated all the way and tightened. Quote
wdwerker Posted January 20, 2013 Report Posted January 20, 2013 Take small bites. Do not use on a direct drive saw! Wear safety glasses . Use a slow feed rate. Feather boards and push sticks. Quote
Byrdie Posted January 21, 2013 Report Posted January 21, 2013 Matt V had one with his old (pre-grizzley/inherited from his grandfather) and talks about it on a couple of the older WTO progams. Quote
Dlhunter Posted January 21, 2013 Report Posted January 21, 2013 Those things just look a bit to scary for me to ever consider. Plus I love my routers Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.