Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Arm-R-Seal storage

Featured Replies

Now that Marc has me hooked on Arm-R-Seal, I need some advice on storing it properly. I bought a gallon and tranfer small quantities (1 cup or so) for use into a quart paint can. Problem is, it usually skims over before I have used it up. I looked into Bloxygen, but seems pricey too me. Any recommendations? Thanks.

==> but seems pricey too me

it actually goes further then you might think. I've never kept track, but i'm pretty sure I get between 20 and 50 shots/can. You don't need to 'flood' the container -- just a shot or two will create a barrier.

Try putting clean marbles in the can to bring the surface level up to the rim. Each time you remove more liquid, add a few more marbles.

I but Waterlox in gallons and pour it into 4 quart mason jars the first time I open it. When finishing I pour just enough in a container, blow a few seconds of propane in the mason jar and close. Propane will settle below the air on top of the varnish. A bottle is a lot cheaper than bloxygen and will last forever. If you have any leftover finish NEVER pour it back in your container as it has been exposed to air for too long. I have been doing this for almost 10 years and it works great. When a mason jar is empty just toss it.

Fill the airspace with glass marbles or misc steel hardware (nuts and bolts), whatever you can get cheaper. Rinse new hardware with mineral spirits, lacquer thinner, or acetone, and let dry before using. You can use them over and over. If your varnish isn't gloss, these will also help agitate the flatting agent.

I've been doing this for many years with varnishes, and I find it more reliable than Bloxygen.

I guess I should elaborate on my one word cell phone post. The mixing mate is a lid that rockler sells, it mixes but is unique in the way it works. When you tip it the air vents into the finish stream so there is no o2 contamination in the can.

These lids are just Fillon lids for the Fillon mixing systems. They come in three types handle, gear or goal post. The one rockler sells are obviously the handle type. The goal post are the same with just two post sticking up to be driven by the mixing machine. If you have the desire you can swap out the goal post or gear with the handle. The goal post design is what pro shops use to make mixing stations for custom mixed stains. You can buy the station or just make them yourself with elcheapo gear motors.

Don

When you tip it the air vents into the finish stream so there is no o2 contamination in the can.

Don

Not sure how you figure that... when finish is removed from the container, regardless of the lid, the volume of finish removed must be replaced by something. If you are not adding marbles, bolts etc., then that volume is replaced by air. Unless that fancy lid is also creating a vacuum... which I sort of doubt. Seems handy and probably a lot cleaner if you do a lot of pouring of finishes but I don't think it will solve the O2 problem OP is talking about.

I personally like the transfer to smaller containers and then adding glass beads or marbles as the level of finish goes down.

Just my opinion.

PS He has gotten me hooked on Arm-R-Seal as well. Great stuff.

Not sure how you figure that... when finish is removed from the container, regardless of the lid, the volume of finish removed must be replaced by something. If you are not adding marbles, bolts etc., then that volume is replaced by air. Unless that fancy lid is also creating a vacuum... which I sort of doubt. Seems handy and probably a lot cleaner if you do a lot of pouring of finishes but I don't think it will solve the O2 problem OP is talking about.

I personally like the transfer to smaller containers and then adding glass beads or marbles as the level of finish goes down.

Just my opinion.

PS He has gotten me hooked on Arm-R-Seal as well. Great stuff.

They do work and work well. Body shops have used them for years. Every finish manufacturer sells them for their pro color match systems. General finishes, sherwin Williams, Mohawk, ppg ditzler all sell these systems. I own the full general RTM line and store pretinted unduro lacquer in 22 stock colors and every RTM stain color.

Don

They do work and work well. Body shops have used them for years. Every finish manufacturer sells them for their pro color match systems. General finishes, sherwin Williams, Mohawk, ppg ditzler all sell these systems. I own the full general RTM line and store pretinted unduro lacquer in 22 stock colors and every RTM stain color.

Don

Interesting. I'll have to look a little more into them.

  • Author

Wow! Thanks for all the input from you guys. It gives me lots of options. Here is another one I am trying right now. Someone on Lumberjocks said they use "Blast Off", which is for blowing dust out of your computer and such. Apparently, it isn't oxygen in the can and other than the marbles or extra hardware, my be the cheapest? I will let you know. Thanks again. : )>

Wow! Thanks for all the input from you guys. It gives me lots of options. Here is another one I am trying right now. Someone on Lumberjocks said they use "Blast Off", which is for blowing dust out of your computer and such. Apparently, it isn't oxygen in the can and other than the marbles or extra hardware, my be the cheapest? I will let you know. Thanks again. : )>

Its not o2. I just saw a tv special where kids were huffing it to get high. No pun intended Huffster.

Don

Wow! Thanks for all the input from you guys. It gives me lots of options. Here is another one I am trying right now. Someone on Lumberjocks said they use "Blast Off", which is for blowing dust out of your computer and such. Apparently, it isn't oxygen in the can and other than the marbles or extra hardware, my be the cheapest? I will let you know. Thanks again. : )>

Don't think you'll find anything cheaper than propane plus it blows a lot lower pressure than keyboard cleaner.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.