Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Way to remove transtint dye?

Featured Replies

So I'm building an walnut table with some Birdseye maple butterfly keys inlaid in it and I used some west epoxy mixed with dark walnut to attach them but the dye in the epoxy soaked into the end grain of the butterfly keys and gave lots of little streaks in them. :(

Is there a way to use acetone or some other solvent to wash the dye streaks out of the maple?

bleach works pretty well with metal complex dyes...

but with epoxy as the binder, i think you're pretty-much screwed...

you'd have to weaken the binder to get the bleach (or whatever) in... maybe some heat+smith's epoxy solvent?

what ever you want to try, do it on some scrap to see how much damage you do...

A simpler solution might be to route out the keys; you likely could use the same template you used to route them out in the first place.  Means you have to make new Birdseye Maple keys, but I think overall you'll have better results faster.

 

Were you using the dye in the epoxy to fill gaps?

  • Author

Yes this is a 4" thick walnut crotch that I butterflied end to end with hand cut keys to hold the ends together for a coffee table they go an inch deep is very minor it's just that the end grain soaked a little dye through

End grain soaked a little dyed epoxy, nothing is going to touch the epoxy without bad results. Cut them out, make new ones, prime the surfaces with clear epoxy to prevent the problem, then glue them in with the dyed epoxy to hide any gaps.

Or cut them 1/8 deep and glue on a veneer cap?

  • 2 weeks later...

End grain soaked a little dyed epoxy, nothing is going to touch the epoxy without bad results. Cut them out, make new ones, prime the surfaces with clear epoxy to prevent the problem, then glue them in with the dyed epoxy to hide any gaps.

Or cut them 1/8 deep and glue on a veneer cap?

I was with Paul and then Steve said "1/8 veneer cap"...I think I'd do that.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.