Skip to content
View in the app

A better way to browse. Learn more.

Wood Talk Online

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.

Advice for cherry finish

Featured Replies

I will be completing a chimney cupboard style cabinet soon. It will be used for clothes in our bedroom. It is built with cherry, both plywood and solid.

I am looking for advice on what type of finish to use. I have sampled tung oil, wipe on poly, watco oil,and an oil varnish blend. Still unsure what route I want to go. I probably am leaning towards wipe on or an oil varnish blend. I like a light satin finish. I thought this decision would be easier.

I consider myself a novice and would appreciate any advice you can give.

Thanks,

Rick

Hey Rick, I just completed this table out of cherry (link below).  I wiped on one coat of dewaxed shellac, then three coats of Arm-R-Seal semi-gloss.  I'm usually a satin guy, too, but I needed to use up the semi-gloss before it went bad.  Definitely use a sealer before your topcoat on cherry.  You can see I still have a bit of blotching even with the shellac, but not too bad and it should even out with aging.  Here's what your cherry would look like (obviously it will darken considerably):

 

  • Author

Thanks for the advice and the heads up on the blotching. I checked the link, nice looking project. Rick

Being a cabinet it doesn't really matter what finish you use, it's a matter of aesthetics  Shellac is my default finish unless I need more protection, like a tabletop; or want a very clear finish then I use lacquer. Easy, forgiving, durable, and appearance-wise - 2nd to none. Oil immediately followed with a light coat of shellac will give a very nice satin finish.

It depends on what you want it to look like when its all done. Plywood blotches bad and the color varies from sheet to sheet. If you want it all one tone then you need to think about coloring the wood. I would not use shellac as a wash coat on cherry ply. GF clear stain base, mohawk sanding sealer or even Charles Neils blotch control will do a better job.

Don

I wouldn't try staining the wood, if it isn't matching add a dye to the finish and tone it instead, but do a test because an amber shellac will even out minor color differences. The "blotching" that you may get with a clear finish is just highlighting the natural variations in color; not the same as stain blotching which is uneven absorption. If you are getting actual blotching with a clear finish then just add more finish. What I like to do is seal it with shellac, sand it smooth with 220 then add additional coats until I'm satisfied, cut back the final coat with very fine sand paper, a 3M finishing pad, or steel wool to reach the desired sheen. Since shellac dries in minutes instead of days, it doesn't take very long.

Even amber shellac can blotch cherry. Anytime you add color you can get blotching even more so on Cherry plywood. Adding a dye color directly to the wood will equalize the woods natural color variations. Adding toner to the seal coat will add additional strength to the color and even out the dye.

Some folks like that perfectly even toned piece and others like to see the different pieces of wood joined together. Since your leaning towards a wipe on finish I'd use some sort of blotch control and something like arm r seal.

Don

If you try dyeing the plywood directly then spray, don't try to wipe it on. A hand pump sprayer will work if you don't have spray equipment. And definitely experiment on scrap first because you won't be able to sand it out without risking the veneer. Unless you have drastic color variation, I wouldn't do it. One other thing... every "sealer" is just thinned film finish whether shellac, lacquer or varnish; just use a thinned version of whatever final finish you chose and save your money.

One other thing... every "sealer" is just thinned film finish whether shellac, lacquer or varnish; just use a thinned version of whatever final finish you chose and save your money.

Different sealers do different things, vinyl seal for example enhances the water resistance of lacquer. The idea with cherry especially plywood left natural is to stop blotching. Any top coat be it armrseal, poly, shellac even water clear wb poly can blotch cherry ply easily. Preconditioners help stop the blotching before the top coat. Charles Neil, and pretty much every major brand clear stain base will help stop blotching.

Don

Different sealers do different things, vinyl seal for example enhances the water resistance of lacquer. The idea with cherry especially plywood left natural is to stop blotching. Any top coat be it armrseal, poly, shellac even water clear wb poly can blotch cherry ply easily. Preconditioners help stop the blotching before the top coat. Charles Neil, and pretty much every major brand clear stain base will help stop blotching.

Don

 

Besides that they help with sanding. Apply a thinned finished then sand back for a smooth substrate for further finishing. Apparently there are sealers with additives to give the film more body for pore filling but I've never used them. 

Don't become transfixed over blotching the cherry, be mindful of it. Remember, cherry in a few months will age and get darker and color variations will even out some. 

 

-Ace-



 

Eight or ten years ago I read (on a forum somewhere) that
Potassium Dichromate dissolved in water rapidly ages cherry, mahogany and
probably other wood to look naturally aged. 
So I bought a small (six ounce) jar on line.  The data sheet cautions care with this toxic
material and I always follow their advice. 
I always experiment with a variety of coloring/top coats on scrap pieces
and most frequently choose the Potassium Dichromate with either a wipe on poly,
Liberon Finishing Oil or Waterlox topcoat for cherry.  Full strength is a half a teaspoon of Potassium
Dichromate in a cup of water.  I find
that mixture is always to strong, making the wood too dark.  I start with a half teaspoon in two cups of
water and sometimes add more water to "thin it down".  You really can't see the full effect (it
looks dark and flat) until you add the top coat.  So here a decade (give or take) later I still
have about half of that jar left.  I love
the way this stuff works, especially on cherry. 
The only photo I have is my stair project but I think you will see the
effect.  Many woodworkers say leave
cherry out in the sun or let it age naturally to darken it.  I find the Potassium Dichromate speeds up the
process in minutes to it's very aged color. 
The sun does darken it but not very much.  I built a bed three years ago without
darkening it and while the color is nice, it doesn't yet have that old dark
look of antiques.    The Potassium
Dichromate cost about $10 as I remember and at my age I'm thinking that is a
lifetime supply.  I've also read that
some woodworkers use lye to darken cherry and the photos look pretty good, but
I'm not messing with a process that works great, is easy to use and produces
fantastic results.  I recommend giving it
a try.



 

post-4424-0-64442500-1359740703_thumb.jp

Potassium dichromate works like magic except on sap wood in my experience. Definitely an option to consider if your looking for that aged look!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

Forum Statistics

  • Total Topics 32.1k
  • Total Posts 437.6k

Member Statistics

  • 26,009 Total Members
  • 3,644 Most Online
  • Joseph b Newest Member ·

Account

Navigation

Search

Search

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.