Recommended Posts

Posted

Okay guys.  I am seeking your advice on a jointer purchase.  I am committed this year to kicking my skills and work quality up a couple of notches this year.  I alread have a 12" dual bevel, sliding, compound miter saw, a hybrid table saw with outfeed table, 14" bandsaw, PC 3 hp router with Woodpecker's microadjust router table and router lift, and various other tools.  The more I build projects using either BORG materials, or ocassionally from Rockler (1 1/2 hrs away), I find the fit and finish are just not what they should be.  So, I am purchasing a Steel City 13" planer with Helical Head and carbide cutters.  I know these two tools, the planer and jointer, will really improve my final product.  The question I have is on the jointer. 

 

I have $1000-$1200 to spend.  Here are my options, obstacles:

 

1.  My shop is small - 12x24.  It's pretty tight quarters with the tools I already have, but I will make room for the right tool.

 

2.  I have 110 v power at this point.  I might be able to upgrade to 220v or a couple of new dedicated 110v circuits but am looking into the costs.

 

3.  I build mainly small projects - picture frames, jewelry boxes, cutting boards, small bookcases, shadow boxes, shelves, etc.  I hope, in the future, to build larger furniture including hope chests for my two beautiful granddaughters and a new bedroom suite for my bride of 30 years. 

 

I have found a Delta DJ-20 in great shape for $1000 on Craigslist.  It's big - 76" long, 26" deep and though wired for 220v can be rewired 110v I believe as it's a 1.5 hp.  I can buy a new 6" Jet or Powermatic with Quick Set knives for about $1000.  I can buy a new Grizzly 8" jointer delivered to my door for about $1000 but it requires 220v as it's 3hp.

 

Here are a couple of my thoughts:

 

1.  The 8" would allow me to buy wider, rough lumber, opening up new possibilities.  I guess with a 6" jointer I could cut off the excess and joint/plane it separately for picture frames, inlay, splines, etc. so I don't have much waste.

 

2.  Since the jointer only makes lumber flat with two parallel surfaces, and I'll have a helical head planer, I don't need to pony up the extra right now for a helical head planer.  The Delta is a parallelogram jointer.  The Jet and Powermatic are not, but is that a huge deal?

 

3.  Buying new gives me a warranty - 5 years on Jet and Powermatic, the 6" jointers.  The Grizzly 8" would have a 2 year warranty, but I've read both wonderful and awful reviews on their products.  The Delta only has about 15 hours use, but still not new.  Don't want that to be the final purchase criteria but has to figure in the mix.

 

4.  Other stuff I haven't thought about?

 

This is a major purchase for me.  I spent almost a year deciding on the router table and router table, but couldn't be happier.  I want to feel the same way about this purchase.

 

I really appreciate your input!

Posted

Buy what you really want and are going to be happy with long term.  

Nothing worse than settling or compromising and then ending up not being happy with it.  And then your stuck.

It's worth paying more for what you really want long term.  Maybe money can buy a little happiness???   

 

I want to see big purchases before I bring them home.  

I'm brand conscious so I'll stick with the 5-year warranty companies even if I'm buying used.  

Resale value is important to me.

 

I prefer buying a used Delta, that's what I've been waiting for.  

It seems no one in my area has good tools for sale or they want too much for them.

If something goes wrong with a used machine the expense of the repair wouldn't outweigh the savings and happiness of the purchase itself. 

 

I don't have either dovetail or P jointer, but from what I understand ease of adjustment is the main difference.  

But how often are you going to be making adjustments?  

Posted

I'm usually the lonely voice against "buy once" - I like to buy inexpensive until Iknow what I want and why I want it.  But, in your case, you know what you want and why you want it, so I'll be another +1 on buying once.

Posted

This is the jointer I am going to be purchasing: http://www.grizzly.com/products/8-x-72-Jointer-3-HP-w-Mobile-Base-Polar-Bear-Series-/G0656P

 

I am not trying to convince you to buy this particular jointer, or even this brand, but allow me to explain how I came about my decision.

 

Firstly, I debated whether I wanted a 6" or 8" jointer. It really came down to what type of lumber I use. I like using as wide as possible of a board in my projects, and it just so happens the majority of my hardwood dealer's stock is right in the 6-10" range. I use a small 6" jointer now, and have to cut the majority of my boards in half. I hate it. 8" jointer is for me.

 

Secondly, I pondered on whether I should buy new or used. This is just a personal preference, but I like buying new. I like getting my goods straight from the dealer/manufacturer with as little interference as possible. I like warranties, and customer support.

 

Third, I really searched for a brand that I liked. I am not a brand specific person, and I have heard plenty good things about Grizzly, but I have also heard just as many negative comments. One thing I like about Grizzly is their top notch customer service. The proof of this in a first hand experience is in this thread: 

 

Lastly, the price point. For someone like me - a hobbyist - price is important. The Grizzly tools hit a sweet spot for me in terms of price.

 

Take it for what it's worth, but that is the method on how I came about deciding which jointer to buy. When I do buy it, I will be sure to write a review about it here.

Posted

Well, I did it!  I went to see the Delta DJ-20 jointer I found on Craigslist.  The guy said it was barely used, in great shape, etc.  Heard that before from Craigslist sellers, but decided to take the hour drive anyway.  WOW!  This jointer was immaculate.  Not a bit of rust, a scratch or dent, or any signs of wear at all.  Turned it on and it hummed like new.  Guy said he put a new belt on it when he bought it new a couple of years ago.  The knives were sharp.  Said he used it to make cabinets for his house then the housing market/economy ruined his business. I ran a piece of lumber across the jointer and it cut like butter.  The guy used to be a trim carpenter and also custom made fireplace surrounds and mantles and clearly took great care of his tools.  He just sold a Delta Unisaw - wish I had caught that one.  Anyway, single father selling equipment to survive.  He was asking $1000, we settled on $950.  Got a great deal and helped a guy out at the same time.  Can't wait to get it hooked up in the shop.

 

Thanks for your input and advice!

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Who's Online   1 Member, 0 Anonymous, 50 Guests (See full list)

  • Forum Statistics

    32.1k
    Total Topics
    437.6k
    Total Posts
  • Member Statistics

    26,009
    Total Members
    3,644
    Most Online
    Joseph b
    Newest Member
    Joseph b
    Joined